ausmini
https://www.ausmini.com/forums/

1098cc which exhaust system?
https://www.ausmini.com/forums/viewtopic.php?f=5&t=90754		 Page 1 of 1
Author:  Willipede [ Thu Oct 08, 2015 10:56 pm ]
Post subject:  1098cc which exhaust system?
Hi everyone I am currently own a morris mini van and want to know which exhaust system, I was looking at something like the RC40 exhaust system and maniflow Cooper freeflow exhaust manifold, but am open to suggestions, also looking to buy some new shocks and some ripspeed hi-lo's I was looking at the gaz lowered shock absorbers, will I need the lowered shocks or with the standard height ones be fine just wondering
Author:  simonw [ Fri Oct 09, 2015 11:57 am ]
Post subject:  Re: 1098cc which exhaust system?
Hi willi... Welcome !
Suggest you do some searching on the site , those topics have been covered extensively .:)
Author:  Willipede [ Fri Oct 09, 2015 5:47 pm ]
Post subject:  Re: 1098cc which exhaust system?
Just a question that I have that I can't find an answer too, I saw for sale dampers that were specific to the mini van as they need to be longer at the rear, or can I use the normal ones that would come in a set?
Author:  gtogreen1969 [ Fri Oct 09, 2015 8:49 pm ]
Post subject:  Re: 1098cc which exhaust system?
Willipede wrote:
Just a question that I have that I can't find an answer too, I saw for sale dampers that were specific to the mini van as they need to be longer at the rear, or can I use the normal ones that would come in a set?

Have a read of this article. http://www.minimania.com/Dampers___Fitment_data . It helped me work out if my shocks were going to fit a clubby sedan that had been lowered.
I measured the distance between my shock mounts with the car on the ground and made sure this distance was in between the shocky operating stroke. Maybe the longer length shock is because vans are supposed to be jacked up higher at the back for load carrying reasons.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/