Mick wrote:
*Sigh*
Who remembers the "good" old days of 107 US cents to the Oz dollar...
Who remembers the "good" old days of 107 US cents to the Oz dollar...
Starting to show your age Mick oh wait it wasn't that long ago
| ausmini https://www.ausmini.com/forums/ |
|
| Crossflow 7-PORT CYLINDER HEAD Ebay https://www.ausmini.com/forums/viewtopic.php?f=5&t=90849 |
Page 1 of 1 |
| Author: | Budgiedagreat [ Thu Oct 22, 2015 1:04 pm ] |
| Post subject: | Crossflow 7-PORT CYLINDER HEAD Ebay |
Has anyone out there bought one of these heads? http://www.ebay.com.au/itm/230620025020 ... EBIDX%3AIT /Users/NewComputer/Downloads/!CFFBJY!CGk~$(KGrHqR,!h4E1KrtE6UgBNT+qk8Hpg~~_12.JPGg] |
|
| Author: | timmy201 [ Thu Oct 22, 2015 1:12 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Looks like the same as these: http://www.piercemanifolds.com/category_s/53.htm |
|
| Author: | Budgiedagreat [ Thu Oct 22, 2015 1:15 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
It's a shame you cannot get them here for the same price. |
|
| Author: | timmy201 [ Thu Oct 22, 2015 1:35 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Budgiedagreat wrote: It's a shame you cannot get them here for the same price. Shipping is US$109 on top, although the dollar is not great at the moment. This guy bought one (or a very similar one), but didn't have good results. You'd have to do some research and figure out whether this spec head is OK for your engine.. http://www.theminiforum.co.uk/forums/to ... port-head/ |
|
| Author: | Budgiedagreat [ Thu Oct 22, 2015 1:40 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Thanks I'll Suss it out |
|
| Author: | realmini [ Thu Oct 22, 2015 2:26 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
I have one on a car that i have been running for about 40,000km.....Needs lots of work to get right & I would EFI it ie. jenvey or EFI hardware kit. Watch valve lift....needs work to run a big lift cam |
|
| Author: | slide [ Thu Oct 22, 2015 5:21 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Yes a mate of mine fitted one and it took him ages to get it right and cost a fair bit more too. IMO maybe better off going with a decent 5 port and a Weber (maybe 44IDF). Lot less hassel and cheaper in the long run, although I do agree the sight of two Webers hanging out the front of the bonnet sure does look cool.... |
|
| Author: | Mick [ Thu Oct 22, 2015 7:26 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
*Sigh* Who remembers the "good" old days of 107 US cents to the Oz dollar... |
|
| Author: | Goldbrocade_62 [ Thu Oct 22, 2015 7:36 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Mick wrote: *Sigh* Who remembers the "good" old days of 107 US cents to the Oz dollar... Starting to show your age Mick oh wait it wasn't that long ago
|
|
| Author: | Mick [ Thu Oct 22, 2015 7:39 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
I said cents not pence! 
|
|
| Author: | drmini in aust [ Thu Oct 22, 2015 9:29 pm ] |
| Post subject: | Re: Crossflow 7-PORT CYLINDER HEAD Ebay |
Way back before Keating floated the dollar (which then promptly sank) I remember the Oz dollar being worth around US$1.15. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|