Here's a tip if you're after some cheap steel to knock up a frame:
- old bed frames (roadside collections)
- scrap metal yards
- the scrap bin at you friendly local engineering workshop
especially if you come armed with a cold carton (slab to those over East) on aFriday arvo

Mike

_________________
Too many cars, and too little time.

my dad was a ground engineer did his trade a either hawker or dehavilan cant remember now and he taught me to oxy weld we replaced a compleat rearend on a car that i owned also did a exhaust fitters coarse at tafe when it was time to do the oxy part i walked up to the oxy adjusted it to how i wanted it not the teacher and of i went he had a look at how i set the regs told me it was wrong i said have a look at my welds he did looked at me and walked away , after he come up to me and said were did you learn to oxy weld i said my dad and he said whats he know about it i said not much but here is his number give him a call and maybe he can explain it to you , next day he sez to me why did you not just say he was a engi i said well you would have thought i was being a smart arse ..... he said you are right
week later was offerd a job with a mate and left the course just b4 we started on mig
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

haha classic story

_________________

Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484

This might be of some help?

http://xthost.info/Haynes/The%20Haynes% ... Manual.pdf