Hi All,

I have a few questions,

1. Does anyone know the Ohm range of the mini's fuel sender, I'm looking at purchasing some gauges and need to know this to get the correct one..

2. I have a set of dry subframes waiting to be fitted, what I need to know is the size/thread of the four top mounting bolts on the front subframe as it didn't come with any...

Thanks

Mat

1. Off the top of my head, pretty low, around 50 or 100 or 200 Ohms if I remember correctly. Why don't you just measure it?

2. Dunno which bolts you mean. The ones that go into the towers? Or the ones that go into the front beaver pannel?

_________________
"Life is not like a box of chocolates... it's more like a jar of jalapenos. Whatever you do today, may burn your arse tomorrow."

Sorry I should have been more specific... The ones that go into the towers.

Mat

Tower usually has studs. Post something in the wanted section. Someone might post you some for nix.

I couldn't find a better picture of mine than this:

_________________
"Life is not like a box of chocolates... it's more like a jar of jalapenos. Whatever you do today, may burn your arse tomorrow."

Dry cars here had studs, wet ones all had bolts. Why? NFI....

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.