Ausmini
It is currently Tue Jun 24, 2025 1:09 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
stibinator
PostPosted: Tue Jan 03, 2006 1:10 am 
Offline
848cc
848cc

Joined: Mon Sep 26, 2005 11:18 am
Posts: 32
Location: blacktown
ok i went to check my oil and my dipstick is stuck? i tried using my 21inch cannons to pull it out but i didnt want to break it... tried puttin oil on it to lube it but it still wont come? anyone had this problem before? know wat to do?
Top
 Profile  
 
h0nk
 Post subject:
PostPosted: Tue Jan 03, 2006 4:26 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 04, 2004 7:36 pm
Posts: 2146
Location: sydney
Never had or heard of that problem before.. You'd think with all the oil in there it would be constantly lubricated... have you tried grabbing it and turning as you pull? Vice grips? You could drill the head off the damn thing.. worst case you'll be looking at getting a new dipstick. Shouldn't cost too much to replace.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Jan 03, 2006 5:49 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
Yeah you won't break it, dipstick tube might come out too, but no big deal.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
mad-mk1
 Post subject:
PostPosted: Tue Jan 03, 2006 8:55 am 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Mon Aug 08, 2005 8:50 pm
Posts: 4112
Location: barossa valley sa
wonder what dipstick put it in too tight!!!

bahahah :D :D :D

_________________
-jamie-
1963morris 850
1965 solid side van
1994 rover racecar
Top
 Profile  
 
CLUBMAN
 Post subject:
PostPosted: Tue Jan 03, 2006 11:41 am 
Offline
998cc
998cc
User avatar

Joined: Fri Feb 18, 2005 7:04 pm
Posts: 517
Location: Adelaide,SA
LOL.
take GT1310's lead and totaly rebuild you motor with all BLING stuff

_________________
BRICKWORX RACING
872-874 South Rd
Edwardstown
SA 5039
PH: 8297 9494
FAX: 8297 7133
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Tue Jan 03, 2006 3:27 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
Hmmm, Crank hit the dipstick? :shock:
Top
 Profile  
 
GT1360
 Post subject:
PostPosted: Tue Jan 03, 2006 3:43 pm 
Offline
Postally Verbose
Postally Verbose
User avatar

Joined: Thu Mar 17, 2005 12:58 pm
Posts: 5748
Location: Richmond.... NSW
CLUBMAN wrote:
LOL.
take GT1310's lead and totaly rebuild you motor with all BLING stuff


Nods got home and found more parts on my door :? :shock:
Top
 Profile  
 
68matic
 Post subject:
PostPosted: Tue Jan 03, 2006 3:50 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
did someone put it in the wrong way and manage to lodge it?

how about trying to pull it out when the car is cold

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...
Top
 Profile  
 
9YaTaH
 Post subject: Nah..
PostPosted: Tue Jan 03, 2006 3:50 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Morris 1100 wrote:
Hmmm, Crank hit the dipstick? :shock:


That would be something to see...

I was thinking that it could be the little section that is pressed out longitudinally to make three springy interference fit things ....may have brokeddead :cry:

_________________
"Show me the Mini!"
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Jan 03, 2006 6:14 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39751
Location: near Baulkham Hills, NSW
Crank is normally an awful long way from the dipstick... would need to be in a couple of pieces to hit it!! :lol:
I would put vice grips around the dipstick tube, pull the lot out... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Convertible Mini
 Post subject: Dip Stick stuck.
PostPosted: Tue Jan 03, 2006 7:55 pm 
Offline
1275cc
1275cc

Joined: Thu Dec 09, 2004 6:57 am
Posts: 3022
Location: JIMBOOMBA QLD.
I told you to get a longer one as it wasn't reaching the oil any more. You shouldn't have used the hammer to Drive it down further to reach the oil though ! I have never seen this happen.
Top
 Profile  
 
Volodkovich
 Post subject:
PostPosted: Fri Jan 06, 2006 5:38 pm 
Offline
848cc
848cc

Joined: Mon Mar 14, 2005 9:44 pm
Posts: 74
Location: Wellytown, NZ
Dude, you have BIG arms if they are 21inch...wholly jesus i wouldnt want to meet you in a dark alley

_________________
Mini - The Wizardry on Wheels!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 79 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.