ausmini • View topic - Valve Saver?

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Valve Saver?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

64mini

Post subject: Valve Saver?

Posted: Sun Apr 23, 2006 4:39 pm

848cc

Joined: Wed Feb 02, 2005 9:18 pm
Posts: 316
Location: Tasmania

I run 1ml Valve Saver per Litre of fuel (95ron all I can get here).eg. 20litres = 20ml

Now I have a modded motor, cam, head etc....I been told I should double the dose.

What do others use?

Should I be adding more to protect my Valves?

Mike

_________________
Lucy - 64 cooper s replica
Lulu - 66 deluxe

Top

CPOCSM

Post subject:

Posted: Sun Apr 23, 2006 4:47 pm

1275cc

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD

Keep it at 1 ml per litre. More will just gum everything up. I use flashlube at 1ml per litre.

Hooroo

Rob Forsyth
Miniot!!

_________________
Rob Forsyth
Miniot!!

Top

drmini in aust

Post subject:

Posted: Sun Apr 23, 2006 4:50 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW

I run the 1mL/Litre of Flashlube valve saver in my 1360,
When I stripped it last (valves & seats had done 30,000 miles) they were fine- all clean and no valve seat recession. I reckon the standard amount is OK.

If you run NONE after rebuild, I'd give the seats 6 months before needing recutting- I proved this (just for fun) with my son's 1100 Clubby.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

andbat

Post subject:

Posted: Sun Apr 23, 2006 5:58 pm

1275cc

Joined: Thu Sep 29, 2005 9:13 pm
Posts: 2234
Location: Wollongong - Street Racer City

i thought when you had a rebuild you have a un-leaded head put on and no longer use valve saver.? like every other car. or atleast if you ahve an unleaded head put on.?

_________________

Sunday Morning Mini Sprint http://www.youtube.com/watch?v=UtGuzqBQ32Q my "rendezvous"

Top

drmini in aust

Post subject:

Posted: Sun Apr 23, 2006 7:25 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW

andbat wrote:

i thought when you had a rebuild you have a un-leaded head put on and no longer use valve saver.? like every other car. or atleast if you ahve an unleaded head put on.?

My 1360 is pretty well ported out, it had oversize (31mm) exhaust valves fitted when done up years ago- no ROOM there for unleaded inserts...

Fitting inserts is an option, I shrink fitted Rover ones to our 1293 when I did it- but that head is near stock. It runs 95 octane and NO additive.
Wife's car... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

64mini

Post subject:

Posted: Sun Apr 23, 2006 8:46 pm

848cc

Joined: Wed Feb 02, 2005 9:18 pm
Posts: 316
Location: Tasmania

Well when fitting the oversize valves to the head I was told the converting to unleaded was very difficult to do.

_________________
Lucy - 64 cooper s replica
Lulu - 66 deluxe

Top

68matic

Post subject:

Posted: Sun Apr 23, 2006 9:00 pm

1275cc

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney

use the stuff, cant hurt can it

also stops pinging

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...

Top

Page 1 of 1

[ 7 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: Bing [Bot] and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: