Ausmini
It is currently Sun Jul 20, 2025 9:52 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Reverse lights
PostPosted: Tue Feb 08, 2005 9:28 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
The reverse lights on Pops don't come on. Is there a switch on or near the gearbox that controls them?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 08, 2005 9:43 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
the switch is in the front of the gearbox on the passenger side, near the top..... if it's fitted

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 08, 2005 9:55 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
ok....do they break often? or could my prob be loose wires or even a fuse?


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 08, 2005 10:25 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Dec 14, 2004 9:38 am
Posts: 2008
Location: Adelaide, South Australia
Is it a rod change box...
if so it's on the gear lever selector box. next to the exhaust, most times the exhaust hits it or the wires have gone missing.

_________________
Miniworx Centre 0883741299
Sooperdooperminicooperexpertengineering
Online BMW Mini Shop


Top
 Profile  
 
 Post subject:
PostPosted: Tue Feb 08, 2005 11:13 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
remote shift.

I'll have a squiz for loose wires.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 3:18 am 
Offline
848cc
848cc

Joined: Sun Apr 18, 2004 6:16 am
Posts: 283
Location: Rakaia, NZ
Hey Anton,

I had the same problem. Not loose wires - the switch was coming apart!! It is held together by squashing the ali body over the plastic top. Take it out, squeeze it back tgether and tap (using a BFH) the folds down to stop any movement. Should start working again.

Gavin


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 6:38 am 
Offline
848cc
848cc

Joined: Sun May 09, 2004 6:12 pm
Posts: 267
Location: Adelaide
The switch, if fitted, is on the front of the gearbox just under the oil filter.When mine didn't work I had to make up a new plunger to get the correct length for it to operate properly.Trial and error with a mutimeter.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 7:29 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
ah...thanks guys....very helpfull info! I'll check it out tonight! :wink:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 4:54 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Jul 05, 2004 9:02 pm
Posts: 442
Location: Castle Hill
So how did you go with your reverse lights anton??

I am having a struggle to find mine, but if you get yours working let me know

_________________
Jet Red Mini K

Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 4:59 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Easy way to see if the switch is fitted is check the rear lights. If the blinkers at the back have twin fillement (sp?) then it's got a reversing light switch. 8)

_________________
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 8:26 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
hmmmm.......I had a good look this arvo. Nothing in the area mentioned......only the large hex head bolt for the reverse gear spring. I had a read of a few manuals, and all I could find was mention of a switch in the wiring diagram....can't see it on the car.

Like you say Poeee.......should there be one or did K's have it as an option....or not at all?

Anyone??


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 8:35 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
They did not come with reversing lights till they had to!

The switch goes onto the the large hex head bolt for the reverse gear spring.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 8:44 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
so....if I go for a pink slip and the guy says..."reverse lights?" and I say "nope"......it will still pass?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 8:59 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
No reverse lights on a `70 car. Mine passes every year, without.
same goes for no heater on early cars. :wink:

<edit> It's the 1098 Clubbie and Clubman GT that got the reversing lights first I think. Twin filaments in the rear blinkers.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 09, 2005 9:08 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
damn old cars...... :lol: ...had me stumped! I was fretting about this one, because it's the only thing I thought would knock me back for a pink slip.

Bring on rego for pops then! :wink:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page 1, 2, 3  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 83 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.