hey i was just wondering if anyone would be able to tell me where i would be able to find these window seals for front passennger and the front driver and also need the 1/4 window rubber

thnks

_________________

any one????

_________________

Minisport in Adelaide!!!

Check their web site

Louis

_________________

Where are you located, if NSW try the miniking or the teh lads at padstow, if melbourne try Northern or link or Lindsay, SA try minisport or Brickworx or you can try classic motoring, all the contacts are in the how to's

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

go somewhere you can look at them before you buy, just to make sure innocenti ones are the same as aussie ones...

have you visually compared your 1/4 vent windows with some on an aussie car?

_________________
did I tell you that I won a trophy?

Trust me, the quarter vents ARE different.
I bet the other weatherstrips are different to an Oz Mini too.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

in that case, get on to the EU/UK mini forums and find other innocenti owners

if you keep the doors that is - if not, I'll swap you a couple of good condition aussie doors

_________________
did I tell you that I won a trophy?

hahah that easy said then done

but i want to keep it original..


dose anyone know any EU/UK mini forums ???

_________________

you can try these ones
http://www.turbominis.co.uk/forums/index.php
or
http://www.minifinity.com/

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

sweet thanks for that

_________________

try google...

http://www.google.com.au/search?sourceid=navclient&ie=UTF-8&rls=RNWE,RNWE:2005-13,RNWE:en&q=innocenti+mini+forum

_________________
did I tell you that I won a trophy?

The Aussie 1/4 light window seals do fit the Inno front opening 1/4 lights. They are a perfect match. Even the rivet holes are in teh same place. I did it about 6 months ago on the inno windows I'm putting in the Elf.

Aren't Inno ones lots different in the front corner of the 1/4 window? I thought they had a sharp corner there, not a 45 deg? angled bit like Oz ones.
Can you please show us a pic?

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

hey yeah it is

this is the pic of it




iv called all round syd but no one knows what im talkin about or dosnt belive me
lol

dose anyone have any contacts in italy???
or know if i can get these made?


thanks

_________________

Cool, I was right for once.
Maybe Elf has Oz doors in his then?

Try a Fiat dealer, those windows look near identical to the ones in my 1969 Fiat 124AC coupe.. when I had it.
Right down to the chromed tin rain deflector, and the stuck-on catch...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.