Ausmini
It is currently Mon Jul 21, 2025 12:11 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
J_A_M
 Post subject: 12G202 head
PostPosted: Sun Mar 06, 2005 8:10 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Got a motor on box today. Block says 99H791P....the chart says it's a Mini Clubman ELC motor...... :? WTF is ELC????

It's got a 12G202 head on it....is that a 1098 head?

....also got twin SU's on it :wink:
Top
 Profile  
 
CPOCSM
 Post subject:
PostPosted: Sun Mar 06, 2005 8:41 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD
Yeppers it is a 1098 head. I think the ELC is a pollution headed motor. The morons at Leyland thought they could clean up their act and try plumbing a couple of pipes into a 998cc cylinder head, connect them to a big air pump and try to lower the CO emissions. Alas, most of the tubes blocked up before the first service and the air pump packed it in soon after. Most people remove the plumbing and insert 4 x grub screws into the holes.

The 1098 head will do well with a good skim(0.5-1.5mm)and not much else - they definitely flow better than the 998cc cylinder heads.

Hooroo for now...

Rob Forsyth
Miniot!

_________________
Rob Forsyth
Miniot!!
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sun Mar 06, 2005 8:54 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Cheers for that Rob...I thought as much.

If I don't get my 1275, then that head on my 998 will be a good second best for now.... :wink:
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Mar 06, 2005 9:12 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
If that 202 head has air injection ports it's the first one I've heard of. :shock:
99H791 is just a late Clubbie, 998cc. Unless it's has a 1098 crank transplant.. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sun Mar 06, 2005 9:24 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
no air injection ports in this head.

I got a good feeling about this motor for some reason. The PO said it was an 1100, but block says otherwise. It looks like it's sitting on a reco box, has twin SU's bolted up to it. I might take the head off it sometime and look inside :wink:

Whats the 1100 stroke again Kev?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Mar 06, 2005 9:28 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
J_A_M wrote:
no air injection ports in this head.

I got a good feeling about this motor for some reason. The PO said it was an 1100, but block says otherwise. It looks like it's sitting on a reco box, has twin SU's bolted up to it. I might take the head off it sometime and look inside :wink:

Whats the 1100 stroke again Kev?

3.296" (83.7mm)
998 is 3" (76.2mm)

Put #1 piston at TDC with plugs out. Stick a piece of wire down to the piston (hold wire vertical) Measure to top of plug hole.
Then do same with #2, without turning engine. Difference is the stroke. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sun Mar 06, 2005 9:36 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
thanx Kev. I'll keep a note of that.
Top
 Profile  
 
min13k
 Post subject:
PostPosted: Sun Mar 06, 2005 9:37 pm 
Offline
I DWIVE A BIG TWUCK
I DWIVE A BIG TWUCK
User avatar

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732
so were ya find this stuff hmmmm
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Sun Mar 06, 2005 9:44 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
'twas from a dude on here :wink:
Top
 Profile  
 
min13k
 Post subject:
PostPosted: Sun Mar 06, 2005 9:46 pm 
Offline
I DWIVE A BIG TWUCK
I DWIVE A BIG TWUCK
User avatar

Joined: Tue Mar 16, 2004 5:17 pm
Posts: 8732
ahuh

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Sun Mar 06, 2005 9:51 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
And the additional Goss :lol:
Just get Dr to have a look at the boxs you have and use the best block
You now know the dirrecance between a good 1100 a 998 and what can be done...Have a ride in Josh's or Morris 8)
Rod the 202 can be done up nicely...better than a 925 :shock:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
cush
 Post subject:
PostPosted: Mon Mar 07, 2005 3:03 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
hey jam,.... we've got the same block ;)

no 202 head for me tho.. ;(

however when i bought it the guy did say it was an 1100 :?

doc

Quote:
Put #1 piston at TDC with plugs out. Stick a piece of wire down to the piston (hold wire vertical) Measure to top of plug hole.


is this with the head on?

_________________
Image
Top
 Profile  
 
fuzzy-hair-man
 Post subject:
PostPosted: Mon Mar 07, 2005 3:34 pm 
Offline
1098cc
1098cc

Joined: Wed Nov 24, 2004 10:23 am
Posts: 1490
Location: Armidale, NSW
Quote:
Put #1 piston at TDC with plugs out. Stick a piece of wire down to the piston (hold wire vertical) Measure to top of plug hole.


Quote:
is this with the head on?


Yes, has to be I think :wink: (spark plugs are in the head after all) :P

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Mon Mar 07, 2005 4:27 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Yes with the head on.. :lol:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 91 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.