Ausmini
It is currently Mon Jul 21, 2025 12:23 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
J_A_M
PostPosted: Mon Mar 07, 2005 8:24 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Between myself and my father in law, we have 'quite a few' radiators now... :lol:

Do the roundy ones have the top outlet at the front of the vehicle, and the Clubby ones have the top outlet under the filler neck?

That's the only visible difference between all of them.
Top
 Profile  
 
EST-071
 Post subject:
PostPosted: Mon Mar 07, 2005 8:32 am 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
The early clubman ones are the same as the roundie with the top outlet at front, the later model clubman had them under the cap neck.
Cheers Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Mar 07, 2005 8:36 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Cheers Pete.

Why was the change made, and which would flow better?
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Mar 07, 2005 9:40 am 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
I think the change was made so that they could fit the airpump for the pollution gear where the top hose would normally go and the Inlet on the head moved to the back..I don't think it would make much difference to the way it flows, and would depend on the condition of the radiator, but i could be wrong..

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Mar 07, 2005 9:47 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
thats logical :mrgreen: cheers Josh.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Mar 07, 2005 6:29 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
If you fit the early rad and thermostat housing, you can pretend your `78 Clubbie never had an air pump & its plumbing... 8)
Bit obvious otherwise with the old pump mount there for all to see.. :shock:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Mar 07, 2005 9:08 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
a-ha!! up there for thinking big Kev! :wink:

Shame all the clubby rads are recoed and the roundy ones look cr@p..... :(
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Mon Mar 07, 2005 9:38 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
I only recently saw all this pollution gear not too long ago, show's you how well it's governed..hell my car is a '78 and it's supposed to have all that crap..glad it doesnt though :mrgreen:

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Mar 07, 2005 9:43 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Mini Mad wrote:
I only recently saw all this pollution gear not too long ago, show's you how well it's governed..hell my car is a '78 and it's supposed to have all that crap..glad it doesnt though :mrgreen:

What would you expect from a Government that invents ADRs, forces manufacturers to comply with them & emission laws, then puts absolutely no testing procedures in place!
I bet I could remove the cat etc from my EA Ford (crap, it's probably full of crap, car might go harder!) and nobody would notice at rego time.. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.