Ausmini
It is currently Mon Jul 21, 2025 12:23 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 2 of 3
  [ 35 posts ]  Go to page Previous  1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 2:12 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
No problem with a `71. Problems are with the late Clubbies that have (had!!) `emission control' plumbing to comply with ADR27A. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
czerial
 Post subject:
PostPosted: Tue Mar 08, 2005 2:25 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Oct 15, 2004 2:46 pm
Posts: 5281
:evil: :evil: :evil: :x :x :x :( :( :cry: :cry:

i hate the RTA with a passion
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 2:43 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
czerial wrote:
i hate the RTA with a passion
Chris, what do you have in Elmo?
Top
 Profile  
 
nermil
 Post subject:
PostPosted: Tue Mar 08, 2005 3:49 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Oct 13, 2004 5:28 pm
Posts: 839
Location: Brisbane, QLD
my 77LS has a 1098 engine in it (i think from a 74 clubman), and no one has ever batted an eyelid at me about it. strange, i thought someone would have said something.

might get a 998 block one day and transfer it all over so that it keeps the performance of the 1100, but has the 998 engine number to go with the rest of the LS gear.
Top
 Profile  
 
cush
 Post subject:
PostPosted: Tue Mar 08, 2005 3:53 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
SA boys are quite on this one.. :)

God Bless Transport SA :)

_________________
Image
Top
 Profile  
 
68matic
 Post subject:
PostPosted: Tue Mar 08, 2005 5:56 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
anton:
five words
angle
grinder
stamp
set
BigF*ckingHammer

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...
Top
 Profile  
 
awdmoke
 Post subject:
PostPosted: Tue Mar 08, 2005 6:15 pm 
Offline
1360cc
1360cc
User avatar

Joined: Thu Feb 03, 2005 1:41 pm
Posts: 12311
Location: Rockingham - Collie WA
Had the block decked on a 1275LS to get a good seal & bump up the compression.
Bonus was no engine numbers to worry about!
Whacked it in a '76 Clubman & didn't even have to fill out a form.

Mind you, probably didn't help my chances when someone went and stole it :cry:

_________________
Too many cars, and too little time.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 6:18 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
68matic wrote:
anton:
five words
angle
grinder
stamp
set
BigF*ckingHammer


Don't... :shock:
If it looks dodgy, U will get done..
It will look stolen even though it's not! :?

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 8:34 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
Don't worry Kev, I would never do that....way too dodgy!

I'll pull the head off this new 998 and have a look at the bores...it might be cr@p anyway! My original 998 bores were OK.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 9:00 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
I wouldn't mess about- just hone and re-ring your 998, or spend a $$- throw a 1098 crank & some 1152 pistons in it.. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 9:04 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
....or pay you to do it.... :lol:

If I can't get my 1275 (as mentioned to you) I will have no choice but to do that. I kinda think that this new 998 has an 1100 crank in it, so I will find out soon.

...but yea, I hear what you are saying :wink:
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 9:08 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Don't write it off yet. Maybe your 1275 is a later one.
The A+ one in Barney was once in a UK 1275GT.. early 80's. :wink:
:idea: Hmmm... I could legally drop that in the Clubbie and stick the MK2 S one in Barney! Then he would be kosher! 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 9:17 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
do 1275's have different engine mounts, steadys and top rad bracket etc?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 9:19 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
J_A_M wrote:
do 1275's have different engine mounts, steadys and top rad bracket etc?

Engine mounts same, top steady bracket (on head) and rad bracket are different.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 9:26 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
ok...thanks...nothing major to buy then to convert....
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 35 posts ]  Go to page Previous  1, 2, 3  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.