TheMiniMan wrote:
Jan it`s a "bleed" pipe,,, the water gallery behind there is actually higher than the top hose outlet hole so i drill it out above there to bleed out any air bubbles that would get caught
the 16v isn`t as bad in that dept, so i normally only do it to the 8vs
remember that these donks originally lay down so not a problem for the bike owners... But when we fit them to mini donks & stand them upright,,,well,,, i`d rather not have any "steam" caught inside the head
Good idea! had some thoughts on this with a bleed valve - but hey - keep it simple
TheMiniMan wrote:
Have a gork at Harrys site,,, he`s welded up the water outlet & re-machined it higher to achieve the same/similar purpose,,, much more work doing it his way tho
i`d like to think that i do things more cost effective achieving the same results
& i can use it as the thermostat by-pass at the same time
I`m so damn smart hey?
Harrys work is realy outstanding! I wish I had a mschine shop like this...
Well Matt, I like you conversions realy much! Steadily developing and all kept simple/easy - it's all in the smal details
Keep on keeping on!
Cheers,
Jan
