Ausmini
It is currently Mon Jul 21, 2025 1:43 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
subwayseth
 Post subject: stuck wheel bearing nut
PostPosted: Wed Jun 09, 2010 2:03 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
Problem:i removed the rear subframe on saturday & started stripping it down to be painted, rebushed, ect. got all the parts off with exception of the right side bearing nut, it wont budge even though it's packed full of grease, got any ideas? also the dampers are still in due to the top of them corroding but i'll see if giving them a soak in lube will loosen them

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Wed Jun 09, 2010 2:07 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Are you turning it the correct way?

Though I think the right side is normal thread direction...

_________________
Image
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 2:10 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
checked thread direction, not that

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
blue_deluxe
 Post subject:
PostPosted: Wed Jun 09, 2010 2:11 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Apr 25, 2008 2:34 pm
Posts: 2002
Location: Brisbane
Its the rear left thats backwards.

But if the frame is upside or you turned it round then youll have to work out which is which.

_________________
Simplify and add lightness
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 2:15 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
nope, checked i was going correct way to the thread

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
micowen
 Post subject:
PostPosted: Wed Jun 09, 2010 4:42 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Mar 30, 2009 5:38 pm
Posts: 1650
Location: macquarie fields NSW
I just had a couple of dramas removing one off one of my front wheel hubs. Spanners and a vice could not budge it, but my 3/4 rattle gun smacked it!
Could a rattle gun be an option?

_________________
Chuck Norris is the only person alive who can kick you in the back of the face!!
mooo, I'm a pig!
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 5:16 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
yea that could be as i was planning on getting one someday...i guess sooner than later :)

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
1stmotionshaft
 Post subject:
PostPosted: Wed Jun 09, 2010 5:20 pm 
Offline
848cc
848cc
User avatar

Joined: Wed May 12, 2010 8:50 pm
Posts: 31
Location: Xantippe WA
It's not how big your tool is, big boy. It's what you do with it :wink:
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 5:27 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
1stmotionshaft wrote:
It's not how big your tool is, big boy. It's what you do with it :wink:


well i had one big mother of a shifter on it & a 2.5m long pipe on the end & still no workie :roll:

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
micowen
 Post subject:
PostPosted: Wed Jun 09, 2010 5:35 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Mar 30, 2009 5:38 pm
Posts: 1650
Location: macquarie fields NSW
For some obscure reason 1stmotion, your avatar picture has me VERY curious about you. :lol:
Hopefully subway, the hammer action of the rattle gun can help. At work I also have an impact driver for sockets. Looks like an awkward ratchet, but what you do is put socket on the driver, place on nut, then belt it with a hammer. It multiplies the force in a turning motion, and jars the nut at the same time.
Cool tool!

_________________
Chuck Norris is the only person alive who can kick you in the back of the face!!
mooo, I'm a pig!
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Wed Jun 09, 2010 5:37 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
You could always fit a ring spanner to the nut and then hit it with a hammer or a block of wood. :wink:
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 5:38 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
micowen wrote:
For some obscure reason 1stmotion, your avatar picture has me VERY curious about you. :lol:
Hopefully subway, the hammer action of the rattle gun can help. At work I also have an impact driver for sockets. Looks like an awkward ratchet, but what you do is put socket on the driver, place on nut, then belt it with a hammer. It multiplies the force in a turning motion, and jars the nut at the same time.
Cool tool!


great idea, i have one only its for a screw driver type attachment but maybe able to use a socket too :)

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
micowen
 Post subject:
PostPosted: Wed Jun 09, 2010 5:52 pm 
Offline
1098cc
1098cc
User avatar

Joined: Mon Mar 30, 2009 5:38 pm
Posts: 1650
Location: macquarie fields NSW
subwayseth wrote:
micowen wrote:
For some obscure reason 1stmotion, your avatar picture has me VERY curious about you. :lol:
Hopefully subway, the hammer action of the rattle gun can help. At work I also have an impact driver for sockets. Looks like an awkward ratchet, but what you do is put socket on the driver, place on nut, then belt it with a hammer. It multiplies the force in a turning motion, and jars the nut at the same time.
Cool tool!


great idea, i have one only its for a screw driver type attachment but maybe able to use a socket too :)


give it a go, but mine is actually designed for 1/2" sockets. Let us know if it works.

_________________
Chuck Norris is the only person alive who can kick you in the back of the face!!
mooo, I'm a pig!
Top
 Profile  
 
GT mowog
 Post subject:
PostPosted: Wed Jun 09, 2010 5:57 pm 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
Try tightening it a little first.

Any chance of a pic?

_________________
Image
Top
 Profile  
 
subwayseth
 Post subject:
PostPosted: Wed Jun 09, 2010 6:01 pm 
Offline
998cc
998cc
User avatar

Joined: Sun Jun 07, 2009 10:27 pm
Posts: 718
Location: northern new england tablelands
i'll go grab one now

_________________
one van, one mini s, one knitted cardigan
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.