Ausmini
It is currently Mon Jul 21, 2025 10:16 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 25 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
MINTI
 Post subject: Knock Knock...
PostPosted: Thu Jan 13, 2011 3:48 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Oct 11, 2009 1:54 pm
Posts: 136
Location: Newcastle, NSW
Who's there? :shock:

Crank! :)

Crank who? :?

Crank who likes to knock knock! :lol:

Image

................................ **** :(

At this stage not sure if I want to buy new crank & pistons (possibly rods as well), or buy a rebuilt complete engine for about the same price!
refurbished crank is obviously an option as well, what to people know about nitrided vs. some kind of cold temp. hardening I've heard mentioned?
Top
 Profile  
 
MiniKit
 Post subject:
PostPosted: Thu Jan 13, 2011 4:07 pm 
Offline
998cc
998cc
User avatar

Joined: Sat Jan 03, 2009 10:26 pm
Posts: 550
Location: Perth, Western Australia
OH dear GOD!! I'm sorry for your loss. :(
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu Jan 13, 2011 4:13 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Try selling it on eBay as a "rare" two-piece crankshaft :? :lol:

Always sad to see broken bits.
How did it happen?
Top
 Profile  
 
Wombat
 Post subject:
PostPosted: Thu Jan 13, 2011 4:16 pm 
Offline
1360cc
1360cc
User avatar

Joined: Mon Jul 26, 2004 7:23 am
Posts: 7339
Location: Sunny Shine Coast, Qld Australia
The Doc swears by Locktite - :roll:

_________________
David L
Image

My greatest fear in life is that when I die my wife will sell my Mini and tools for the price I told her I paid for them!
Top
 Profile  
 
woodwormm
 Post subject:
PostPosted: Thu Jan 13, 2011 4:19 pm 
Offline
998cc
998cc
User avatar

Joined: Sat Jul 12, 2008 10:09 pm
Posts: 702
Location: Radelaide
this looks like there's going to be a duel...

liquid nails v supa glue

sadly the always forgotten, rarely mentioned, tarzan's grip is the only one up to this task :P
Top
 Profile  
 
MINTI
 Post subject:
PostPosted: Thu Jan 13, 2011 4:23 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Oct 11, 2009 1:54 pm
Posts: 136
Location: Newcastle, NSW
willy wrote:
How did it happen?


It died doing what we all love, a rather spirited ride around the country hillside.

It's really kinda stumped me with what to do with the engine now... and therefore the whole car(s)!
Top
 Profile  
 
willy
 Post subject:
PostPosted: Thu Jan 13, 2011 4:36 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Ah easy as.

New crank shaft, get it crank & straightness checked first.
Your rods should be fine unless they haven't hit anything.
Check tunnel clearance (probably will need a quick close up and regrind - easy).
Pistons should also be fine too unless they've tapped the head. Even still, you'd be very surprised!

Not a whole lot of work, and definitely not too much money down either.
Top
 Profile  
 
Fiji
 Post subject:
PostPosted: Thu Jan 13, 2011 4:47 pm 
Offline
1098cc
1098cc

Joined: Mon Jul 10, 2006 5:59 pm
Posts: 1275
Location: Bris / Syd
MINTI wrote:
willy wrote:
How did it happen?


It died doing what we all love, a rather spirited ride around the country hillside.

It's really kinda stumped me with what to do with the engine now... and therefore the whole car(s)!


easy . keep the car fix the engine. crank away

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt
Top
 Profile  
 
MINTI
 Post subject:
PostPosted: Thu Jan 13, 2011 5:14 pm 
Offline
848cc
848cc
User avatar

Joined: Sun Oct 11, 2009 1:54 pm
Posts: 136
Location: Newcastle, NSW
willy wrote:
Ah easy as.

New crank shaft, get it crank & straightness checked first.
Your rods should be fine unless they haven't hit anything.
Check tunnel clearance (probably will need a quick close up and regrind - easy).
Pistons should also be fine too unless they've tapped the head. Even still, you'd be very surprised!

Not a whole lot of work, and definitely not too much money down either.


Did a -quick- look around, all I can see for NEW crankshaft prices are in the range of $2K???, What type of cranks aren't I finding?
Will need new pistons (http://i120.photobucket.com/albums/o170/hoobiedoo/sven/IMG_1431.jpg). conrods have a few scratches but look straight - mechanic checking them and i'll find out tomorrow with the prices for a rebuild.
Top
 Profile  
 
Hunter2
 Post subject:
PostPosted: Thu Jan 13, 2011 5:30 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jul 23, 2010 12:45 pm
Posts: 460
Location: Pitt Meadows, B.C. CANADA
I had a Mini crank prepared by a shop in Salem, Michigan USA that works on high performance cranks for serious HP drag racers (among other clients), including welding them back up...so locktiting a Mini crank would seem to be a piece of cake.

_________________
Select a gear, bring up the revs and release the clutch...off you go!
Top
 Profile  
 
GT mowog
 Post subject:
PostPosted: Thu Jan 13, 2011 5:32 pm 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
MINTI wrote:
Did a -quick- look around, all I can see for NEW crankshaft prices are in the range of $2K???


How many cranks are you buying for that price? Send me a PM if your looking for a new crank.

_________________
Image
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Thu Jan 13, 2011 7:50 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
ring Josh at Miniimports and get an A+ crank - will use the same large journal rods as your broken one there
Top
 Profile  
 
justminis
 Post subject:
PostPosted: Thu Jan 13, 2011 8:03 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Mar 26, 2004 8:44 pm
Posts: 1084
Location: Far North Queensland
Josh did have some new A+ cranks too.

_________________
Steve
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Thu Jan 13, 2011 8:16 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Pretty cheap from here, but check the freight cost first.
http://www.minisport.com/mini-spare-par ... M6232.html

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Hunter2
 Post subject:
PostPosted: Fri Jan 14, 2011 3:41 am 
Offline
848cc
848cc
User avatar

Joined: Fri Jul 23, 2010 12:45 pm
Posts: 460
Location: Pitt Meadows, B.C. CANADA
$329 Canadian before shiping, brokerage and taxes (no duty on Antigue Auto Parts) is a good price for a new A+ crank as drmini notes.

Last new one I got was just $350 US plus shipping, brokerage and taxes, because I asked for an advertised 10/10 crank. Supplier didn't have the 10/10 crank in stock so sent new one for the same price - otherwise $650.

Fully custom new crank was $1,200 from same US supplier.

Shopping is always useful.

_________________
Select a gear, bring up the revs and release the clutch...off you go!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 25 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 83 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.