No, it's the wrong shape, really.
a 68 Oz Cooper S (or any other Oz Mini with the heater under the dash) had 2 different ones, they were L and R handed. Hose went on towards one end and they were curved to fit in behind the dash trim.
Clubbies had plastic ones the same shape, earlier ones were steel. I don't know the changeover point.

[edit] Clubby p/no was AYG9231 for LH, and AYG9230 for RH.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Put a post in wanted for some s/h ones.
Every Clubby had them so there should be a zillion about.
You can't see them once installed, so who cares if plastic or steel...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.