ausmini • View topic - Stainless Bracket bending.

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Stainless Bracket bending.

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Hobson

Post subject: Stainless Bracket bending.

Posted: Fri Feb 27, 2015 11:12 am

998cc

Joined: Tue Sep 10, 2013 3:21 pm
Posts: 979
Location: St. George Area, New South Wales

I have a RHS bracket for a seam mirror, what is the best way to "adjust" it to suit the left hand side?

_________________
Nick

http://www.ausmini.com/forums/viewtopic.php?f=3&t=86675

Top

Gordo

Post subject: Re: Stainless Bracket bending.

Posted: Sat Feb 28, 2015 3:00 pm

1098cc

Joined: Thu Sep 30, 2004 3:12 pm
Posts: 1461
Location: Brisbane

Rectangular hollow section? Difficult to bend nicely... Squishes the sides in

_________________
If you want more inches, stroke it
Life's a garden.... Dig It!
http://www.ausmini.com/forums/viewtopic.php?t=20746

Top

cd_design

Post subject: Re: Stainless Bracket bending.

Posted: Sat Feb 28, 2015 6:33 pm

848cc

Joined: Tue May 27, 2014 12:57 pm
Posts: 265
Location: Dundalk, Ireland

I was waiting for someone to mention rectangular hollow section.

Post a picture of the bracket Hobson, might make it easier to figure out how to modify it to suit LHS

LHS is left hand side, just incase anyone thinks its Lozenge Hollow Section

*I couldnt think of any shape that started with L, google gave me Lozenge - A diamond shape

_________________

Top

Hobson

Post subject: Re: Stainless Bracket bending.

Posted: Sat Feb 28, 2015 6:55 pm

998cc

Joined: Tue Sep 10, 2013 3:21 pm
Posts: 979
Location: St. George Area, New South Wales

I should have known better than to call it a RHS, being a structural draftsman, but It was Friday and I was procrastinating.

refer attached image borrowed from minisport.

_________________
Nick

http://www.ausmini.com/forums/viewtopic.php?f=3&t=86675

Top

drmini in aust

Post subject: Re: Stainless Bracket bending.

Posted: Sat Feb 28, 2015 7:09 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

That looks pretty simple, if it really is SS, just clamp the vee bracket flat, then cold bend it the other way.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

1310/71

Post subject: Re: Stainless Bracket bending.

Posted: Sat Feb 28, 2015 7:12 pm

1275cc

Joined: Mon Mar 22, 2004 7:41 pm
Posts: 4319
Location: Plumpton, NSW

Little piece of trivia for cd_design, the Renault diamond emblem is called losange in French.

_________________

Top

1071 S

Post subject: Re: Stainless Bracket bending.

Posted: Sun Mar 01, 2015 7:50 am

998cc

Joined: Fri Apr 01, 2011 8:33 pm
Posts: 1195

Doesn't it just go on upside down???

You will need to distance the mirror from the bracket to allow clearance at the inner edge.

Cheers, Ian

Top

cd_design

Post subject: Re: Stainless Bracket bending.

Posted: Sun Mar 01, 2015 8:02 am

848cc

Joined: Tue May 27, 2014 12:57 pm
Posts: 265
Location: Dundalk, Ireland

You could just draw a center line and use the mirror component tool?

On a serious note Im going with Ian, looks like you just need to turn it upside down to fit,

You do not have the required permissions to view the files attached to this post.

_________________

Top

drmini in aust

Post subject: Re: Stainless Bracket bending.

Posted: Sun Mar 01, 2015 8:57 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

If you just turn it over the mirror's mount won't be vertical. may not matter...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

VanMorrison

Post subject: Re: Stainless Bracket bending.

Posted: Sun Mar 01, 2015 9:18 am

848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia

if your only running with one ( so theres no comparison on the opposite side ) id just turn it upside down..

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R

Top

Hobson

Post subject: Re: Stainless Bracket bending.

Posted: Sun Mar 01, 2015 5:50 pm

998cc

Joined: Tue Sep 10, 2013 3:21 pm
Posts: 979
Location: St. George Area, New South Wales

haha, if you notice when you flip the image the bottom bar stick out (towards the rear of the car) when you flip it, the mirror pretty much faces the ground.

I will give Doc's option a go and see how I go.

_________________
Nick

http://www.ausmini.com/forums/viewtopic.php?f=3&t=86675

Top

Page 1 of 1

[ 11 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 96 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: