Excellent. Can't wait to see everyone's cars. Should be a good day.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

Photos of the finished project.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

It's was good to meet you today and see your masterpiece in the flesh so to speak. You should be very proud this is an excellent conversion and better in real life that the photos.
Rob

_________________
1972 Leyland Mini Clubman
2000 Honda CBR929RR

Cheers thanks Rob. It was good to chat to yourself and other like minded mini people.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

After a few days of driving I realised that this was required to get the perfect clutch throw. Works a treat.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

I want one

nice simple solution, though a bigger, maybe plastic foot might be a good idea - the bolt will probably thump a hole in your carpet

_________________
did I tell you that I won a trophy?

Yeh I thought of that but I don't need to push it hard to the floor so it should be ok. Good advice though.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

How do you find the weight of the clutch pedal?

when you're fanging through the hills and the red mist descends, you're not going to be gentle with it, you'll be punching it to the floor and back up as quick as you can...

_________________
did I tell you that I won a trophy?

True. Fanging around is pretty common now with the new engine.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

I bet...

_________________
did I tell you that I won a trophy?

Driving around has been fun but as we all know, it is a project car and there is always something we can do to it.
I wanted wider wheels to fill out the wheel arches but not as wide as the usual minilites or superlites. I also wanted something different.
I found these and have been impressed.
Ultralite Enki 13x7 but with an offset of +2 so they don't stick out as far as the usual Ultralites. No spaces required either.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

Very nice, where did you find them?

Mini sport UK

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255