Ausmini
It is currently Sat Aug 09, 2025 5:40 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
J_A_M
 Post subject: HS2 Needle choice
PostPosted: Sun Nov 06, 2005 9:21 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
What HS2 needle would be recommended in twins, for a worked 1100 ?

Mine have H6's, but I think I need a bit more juice down low.

I am going to pull them out this week. Who sells new ones?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Nov 06, 2005 9:28 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Midel do. I'd ring them and ask for Bill... :wink:

Just looked at WinSU- an AH2 (which I've used in twin carb 1098s before) is a little richer at bottom end. Might do. But ask Bill.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Spaceboy
 Post subject:
PostPosted: Sun Nov 06, 2005 9:58 pm 
Offline
1360cc
1360cc

Joined: Mon Nov 01, 2004 4:36 pm
Posts: 7673
is there a link to this magical winsu? :)
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Nov 06, 2005 10:16 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Spaceboy wrote:
is there a link to this magical winsu? :)

http://www.winsu.co.uk/
enjoy. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Nov 07, 2005 8:37 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
a DS seems to be richer down low (10%). The graph looks better.....
Top
 Profile  
 
h0nk
 Post subject:
PostPosted: Mon Nov 07, 2005 2:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 04, 2004 7:36 pm
Posts: 2146
Location: sydney
I've got a 998cc been stroked to 1100 and had plenty of head work done, etc.. I went to bill at SUmidel with my twin HS2's and he gave me M needles if I rememember correctly. I think the M were for a standard 1275.. They're working perfectly for me. But yeah I'd recommend seeing bill, he's a genius.
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Nov 07, 2005 7:30 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
:oops: ...my bad.....pulled them out tonight and they aren't H6's.....they are AN's !
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Nov 07, 2005 8:38 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Anton I've got some Ms here if you want to try. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Mon Nov 07, 2005 8:46 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
are they decent? my current ones are worn...so I want to put decent ones back in.

Keen to try some different combo's....but WHY are there so many!!!! :shock:

Got RAMFLO's coming this week :wink: Air box will go on the GT 8)

EDIT: M's just seem richer at top end (compared to AN's)
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Mon Nov 07, 2005 9:44 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Yes they are good.
I've got 10 or so? pairs of HS2/4 style fixed needles- will PM you tomorrow with what I've got. :wink:

PM sent.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Tue Nov 08, 2005 8:05 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
J_A_M wrote:
Got RAMFLO's coming this week :wink: Air box will go on the GT 8)


hate to be anal Anton, but your air filter housing is for a MK 1 S, your GT needs the one with the flat on the passenger side ;) :D :D :D
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Nov 08, 2005 8:14 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
:oops: I will have to cut it and weld a flat on the side then :P :lol:

Thanks for pointing that out Simon. :wink:
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Thu Nov 10, 2005 11:59 am 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
borrowed some M needles from Kev (thanks mate)....will try them this weekend.

Here is a comparison with my original AN's

Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.