Ausmini
It is currently Tue Aug 05, 2025 12:34 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Gadgets mini
PostPosted: Fri Jun 09, 2006 6:21 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
trying to workout what needle i need but cant get win su to work

I have a 1098 , single HS4 carbie Factory 3-1 extractors with a 2 inch straight through exhaust with a hotdog muffler
seems to run rich no matter how i set the adujstment thinking i have the wrong needle
can anyone help

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Fri Jun 09, 2006 6:24 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
I reckon this is a pretty good program http://www.mintylamb.co.uk/suneedle/ or this http://www.teglerizer.com/cgi-bin/needle090db.cgi

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Fri Jun 09, 2006 7:27 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
Hanra wrote:
I reckon this is a pretty good program http://www.mintylamb.co.uk/suneedle/ or this http://www.teglerizer.com/cgi-bin/needle090db.cgi


cheers

Now i just need to know how to work it :oops:

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
Hanra
 Post subject:
PostPosted: Fri Jun 09, 2006 7:33 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sat May 08, 2004 9:01 pm
Posts: 6844
Location: Cairns, Nrth QLD
The 1st 1 is pretty simple just select jet size 90tho, then put in ur needle type or select another u want to compare to n it will plot it on a graph

_________________
Image
http://www.youtube.com/user/Hanras
Top
 Profile  
 
JAM_IT
 Post subject:
PostPosted: Fri Jun 09, 2006 7:41 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jan 06, 2006 9:11 pm
Posts: 1016
Location: SYDNEY
a 1098 with HS4 should NOT have a 2" exhaust.

I had one, and replaced it because the muffler was shot (bought second hand). I put in a 1.75" with twin box RC40 and I gained a noticable amount of HP and torque.

WinSU says ABY

I was recently running a similar setup in JAM and had a ADS needle. It was PERFECT :wink:

_________________
Website: www.justanothermini.com
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Sat Jun 10, 2006 5:30 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
Cheers Anton
i will try that needle :)

whoops a little :oops:
as i measured my Zorst and its 1"3/4 pipe not 2" :oops: :oops:

so i am glad i dont have to replace it :D

cheers

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
JAM_IT
 Post subject:
PostPosted: Sat Jun 10, 2006 7:23 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jan 06, 2006 9:11 pm
Posts: 1016
Location: SYDNEY
Gadgets mini wrote:
Cheers Anton
i will try that needle :)



Let me know what you have, before going out and buying a new one ($20?)

The ADS is a fair bit leaner than the WinSU recommended one for that spec. :shock: The ADS was great for me!

_________________
Website: www.justanothermini.com
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Sun Jun 18, 2006 2:41 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
finaly got to check out what needle i have its an ADF

its a bugger when work gets i the way of Miniing

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
JAM_IT
 Post subject:
PostPosted: Sun Jun 18, 2006 5:34 pm 
Offline
998cc
998cc
User avatar

Joined: Fri Jan 06, 2006 9:11 pm
Posts: 1016
Location: SYDNEY
ADF is a standard Clubman HS4 needle.

I have a few HS4 carbs, all have ADF needles.

_________________
Website: www.justanothermini.com
Top
 Profile  
 
DarkenMini
 Post subject:
PostPosted: Sun Jun 18, 2006 8:48 pm 
Offline
998cc
998cc

Joined: Mon May 02, 2005 2:24 pm
Posts: 531
Location: Rockhampton
has anyone heard of anyone using a 2inch SU on there mini? Whats the Part Name Eg HS4 or HS6
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 95 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.