Ausmini
It is currently Mon Aug 11, 2025 5:11 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Namibian CAMEL
 Post subject: Car stands where
PostPosted: Mon Aug 28, 2006 11:40 am 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
Got to run now.

Can't search.

Please advise as to where i can put car stands under the car so the brakes can be attended to.

Cheers 8)

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility
Top
 Profile  
 
Harley
 Post subject:
PostPosted: Mon Aug 28, 2006 12:35 pm 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10654
Location: SE Melbourne
On the rear, its under the rubber cones, in line with the wheel axle.
On the front it's pretty much the same.

If I'm wrong I'm sure someone will say so very quickly. :D
Top
 Profile  
 
Matt68
 Post subject:
PostPosted: Mon Aug 28, 2006 1:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Mar 18, 2004 1:33 pm
Posts: 2213
Location: Darling Downs QLD
tips:

Make sure car is on very level ground. A flat concrete floor is best.

Use small pieces of wooden board to spread the load and prevent dents to the subframes.

Front brakes; handbrake on and chock back wheels,
Back brakes, Leave it in first, chock the front wheels.

Use proper axle stands, not piles of bricks etc.


Be careful, even camels can be squashed. :wink:
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Mon Aug 28, 2006 4:37 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
Ben if you put the car on stands you wont need the brakes :wink:

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
Namibian CAMEL
 Post subject:
PostPosted: Mon Aug 28, 2006 4:52 pm 
Offline
teh admin God
teh admin God
User avatar

Joined: Sat Mar 20, 2004 12:25 pm
Posts: 3932
Location: Smitho, Tassie
:lol:

Well, it was a great fun thing to do. I must have broke something cause ive got no brakes. Im going to get someone to make them better right as soon as they can though.

I replaced the shoes and it took a long time to get them back on, and now i have no brakes 8) . But thats alright for now.

_________________
Sir Namibian CAMEL of MONGOLIA !!!
Vrilen Snyson Racing: Finding us all a Vrilen
Asparagus: Experience the versatility
Top
 Profile  
 
9YaTaH
 Post subject: Blocks
PostPosted: Mon Aug 28, 2006 6:29 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
[quote="Matt68"]tips:

Make sure car is on very level ground. A flat concrete floor is best.

Use small pieces of wooden board to spread the load and prevent dents to the subframes.

Front brakes; handbrake on and chock back wheels,
Back brakes, Leave it in first, chock the front wheels.

Use proper axle stands, not piles of bricks etc.


Be careful, even camels can be squashed. :wink:[/quote]

I would recommend good solid blocks of hardwood rather than "small pieces of wooden board" which could split and let the car fall.

[sorry if this sounds too analy retentive ] :oops:

_________________
"Show me the Mini!"
Top
 Profile  
 
Matt68
 Post subject: Re: Blocks
PostPosted: Tue Aug 29, 2006 9:04 am 
Offline
1275cc
1275cc
User avatar

Joined: Thu Mar 18, 2004 1:33 pm
Posts: 2213
Location: Darling Downs QLD
9YaTaH wrote:
Matt68 wrote:
tips:

Make sure car is on very level ground. A flat concrete floor is best.

Use small pieces of wooden board to spread the load and prevent dents to the subframes.

Front brakes; handbrake on and chock back wheels,
Back brakes, Leave it in first, chock the front wheels.

Use proper axle stands, not piles of bricks etc.


Be careful, even camels can be squashed. :wink:


I would recommend good solid blocks of hardwood rather than "small pieces of wooden board" which could split and let the car fall.

[sorry if this sounds too analy retentive ] :oops:


No worries, is good to have that pointed out. I probably should have mentioned the 'small pieces of wooden board I use are 2" thick, 8" wide and 12" long hardwood planks...... :roll: :roll:

Just a little too subtle in my original description?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 241 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.