Not mini related - but I need info and you lot have a clue. (some of you

)
On my regular blast through the northern wilds, the Exxon Valdez has split a FI hose. I need to move it appox 1km to a place where I can park it until parts arrive.
I have some suitable water hose handy. The water hose is pressure rated to standard that would allow its substitution.
My question is what is the impact in using water rated hose for fuel as a stop gap (1km) for my split FI hose, so at least it will be safe. My concern is for the injectors if sludge comes off the hoses. I have never seen how water hoses react to fuel so I am flying a little blind.
Why dont I use fuel rated hose instead? - cant get any of the correct diameter that will handle the pressure.