Ausmini
It is currently Thu Jun 26, 2025 10:33 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
poeee
PostPosted: Tue Jan 20, 2009 7:36 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Has anyone done it without persuading the body with a hammer or angle grinder?

_________________
Image
Top
 Profile  
 
sports850
 Post subject:
PostPosted: Tue Jan 20, 2009 7:38 am 
Offline
Postally Verbose
Postally Verbose
User avatar

Joined: Mon Jan 02, 2006 9:12 am
Posts: 19595
Location: Northern NSW
Check out Nicks in members gallery , mounted in the inner guard without any obvious cutting ,
http://www.ausmini.com/forums/viewtopic ... &start=195

_________________
Image
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Tue Jan 20, 2009 7:46 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Yes that thread was what triggered my question. I mean straight on the radiator between the radiator and the inner guard grill.

_________________
Image
Top
 Profile  
 
Harley
 Post subject:
PostPosted: Tue Jan 20, 2009 8:09 am 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne
The rover thermofans from the late 80s bolt onto the radiator grille (but on the wheel side) with no body modifications at all. Don't even need to drill holes.
:D
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Tue Jan 20, 2009 8:17 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
So as long as you have a good seal between the rad and the cowl on the body you're fine??

I wanna run a thermo fan on the Moke, and get rid of the engine fan.

_________________
Image
Top
 Profile  
 
Davo111
 Post subject: Cool me down
PostPosted: Tue Jan 20, 2009 8:35 am 
Offline
Rover Cooper
User avatar

Joined: Sat Feb 03, 2007 9:15 am
Posts: 2401
Location: Werribee Vic. RETIRED - VMCI 3225 ,
you dont really need to have a secure fit, the fan on the rover will suck the skin off a custard from about 50 metres and it has better vaccuum than Mick Jaggers Lips around a polly waffle, :wink: :wink: so all you gatta do is fit it opposite the radiator, supply some electricity and turn it on. :shock: :shock: Mine works fine in this hot weather, not a problem. :roll: I have 2 fans the original one and the one Rover supply with the A/C kit.
Top
 Profile  
 
Harley
 Post subject:
PostPosted: Tue Jan 20, 2009 9:08 am 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne
poeee wrote:
So as long as you have a good seal between the rad and the cowl on the body you're fine??

I wanna run a thermo fan on the Moke, and get rid of the engine fan.


Just make up a big rubber seal that gets clamped between the shroud and the body.

As for motorkhanas, I'd be wanting to stay with the inboard factory fan so the external one isn't damaged from stones and crap.
Put some flyscreen over it if thats the case.
Top
 Profile  
 
aaron
 Post subject:
PostPosted: Tue Jan 20, 2009 9:46 am 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 13, 2004 4:41 pm
Posts: 4418
Location: sydney
yup, fitted one to my sons mini. it's an 8" fan between the inner guard and the radiator. went in no worries. it is a very thin fan though, so u will need to source one of those.

_________________
Image
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Tue Jan 20, 2009 10:10 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
aaron wrote:
yup, fitted one to my sons mini. it's an 8" fan between the inner guard and the radiator. went in no worries. it is a very thin fan though, so u will need to source one of those.


How did you attach it to the radiator??

_________________
Image
Top
 Profile  
 
Harley
 Post subject:
PostPosted: Tue Jan 20, 2009 10:16 am 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne
An 8" fan should attach to the radiator grille without body mody. You'd just need some big washers and some long screws.
Top
 Profile  
 
smiling_simon
 Post subject: re: thermofan
PostPosted: Tue Jan 20, 2009 11:23 am 
Offline
848cc
848cc

Joined: Wed Apr 26, 2006 1:50 pm
Posts: 127
Location: Melbourne, VIC
I managed a 9" thermofan in that small space without cutting/bending/hammering - wouldn't fit much more though! You could possibly mount a bigger thermofan if you put it on the outside (wheel arch side) as it's external to the engine bay then - ie. you could fit a 10" or 12". This is my next upgrade plan (a SPAL would do nicely.)
Top
 Profile  
 
1018cc
 Post subject:
PostPosted: Tue Jan 20, 2009 5:57 pm 
Offline
Give Ash some flowers Nick .
User avatar

Joined: Wed Aug 09, 2006 1:22 pm
Posts: 10149
Location: Toowoomba Region, QLD
Poeee, I have moved my thermo fan into the space that you mention. I found that I just couldn't seal all the gaps up enough to make it full effictive.

I can take photo's for you if you want but mine is a 9" one. It fits........just.

_________________
"In two years time your car will be like a lady's clothes, out of date, my car will still be in fashion when I am dead" - Sir Alec speaking to Pininfarina
Top
 Profile  
 
aaron
 Post subject:
PostPosted: Tue Jan 20, 2009 6:41 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 13, 2004 4:41 pm
Posts: 4418
Location: sydney
poeee wrote:
aaron wrote:
yup, fitted one to my sons mini. it's an 8" fan between the inner guard and the radiator. went in no worries. it is a very thin fan though, so u will need to source one of those.


How did you attach it to the radiator??


i wired it onto the slats in the guard, doesn't move

_________________
Image
Top
 Profile  
 
phillz
 Post subject:
PostPosted: Tue Jan 20, 2009 7:08 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Nov 19, 2008 7:18 pm
Posts: 206
Location: Burpengary,Brisbane Nth(the better side of Bribane)
Sir Spamalot wrote:

I can take photo's for you if you want but mine is a 9" one. It fits........just.


:shock:

_________________
https://t.me/pump_upp
Top
 Profile  
 
mattsmadmini
 Post subject:
PostPosted: Tue Jan 20, 2009 7:21 pm 
Offline
Milatsmadmini
User avatar

Joined: Mon Nov 12, 2007 6:57 pm
Posts: 6287
Location: the inner west of sydeney!
mine is. and it is great. :D

like Aaron mine is mounted to the radiator directly with sorta these weird zip tie things.... goes pretty good :lol: (this is a moke though and as such not such a big "angle" on the "slats") but its a 9" with 60mm width and yeh.... goes well... :lol:

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 106 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.