| ausmini https://www.ausmini.com/forums/ |
|
| URGENT Rover Mini registration advise required https://www.ausmini.com/forums/viewtopic.php?f=2&t=50005 |
Page 1 of 1 |
| Author: | IwannaMini [ Thu Feb 05, 2009 11:52 pm ] |
| Post subject: | URGENT Rover Mini registration advise required |
Does anyone know from person experience etc if a Rover Mini (1987 model, Automatic) currently registered in Victoria with full compliance papers etc will be allowed to be transferred over to NSW registration? Any help and/or advise is greatly appreciated. |
|
| Author: | screech [ Fri Feb 06, 2009 5:40 am ] |
| Post subject: | |
No. You have to get a Blue slip. This Says for cars that are registered in other states too. http://www.rta.nsw.gov.au/registration/getnewrego/interstatevehicles.html |
|
| Author: | IwannaMini [ Fri Feb 06, 2009 5:50 am ] |
| Post subject: | |
screech wrote: No. You have to get a Blue slip.
This Says for cars that are registered in other states too. http://www.rta.nsw.gov.au/registration/getnewrego/interstatevehicles.html *nods* I knew that much, but does anyone know off hand if this car would pass blue slip??? I have heard stories that its hard to register automatic Rover Minis in NSW because they dont have park to lock the breaks when you are stopped. I am certain the car would pass typical blue slup stuff (ie lights, brakes, suspension etc etc) but I wanted to know if there was a law against them |
|
| Author: | Maxi23 [ Fri Feb 06, 2009 6:18 am ] |
| Post subject: | |
You will need both an engineers certificate & a blue slip. You wont get the blueslip without the engineers certificate. And you wont get rego without the blueslip. http://www.ausmini.com/forums/viewtopic.php?t=39620 |
|
| Author: | IwannaMini [ Fri Feb 06, 2009 8:19 am ] |
| Post subject: | |
Maxi23 wrote: You will need both an engineers certificate & a blue slip.
You wont get the blueslip without the engineers certificate. And you wont get rego without the blueslip. http://www.ausmini.com/forums/viewtopic.php?t=39620 OMG Maxi your a LEGEND... Sorry I did do a search, but for some reason I missed your thread. Thanks so much. 
|
|
| Author: | Maxi23 [ Fri Feb 06, 2009 8:30 am ] |
| Post subject: | |
I had no idea what I was in for until I got the car back to NSW, was a bit of a confusing process until the mechanic ran me through it. I have noticed that some people go on about an engineering plate on the car...I didnt get one..and I still don't have one. I have an engineers certificate and a 'condition' printed on my rego label. I keep a photocopy of the certificate with the car at all times. Glad my thread helped a bit 
|
|
| Author: | bnicho [ Fri Feb 06, 2009 12:25 pm ] |
| Post subject: | |
Why don't you ring the RTA and ask? |
|
| Author: | ALPINE MOKE [ Fri Feb 06, 2009 12:27 pm ] |
| Post subject: | rover mini stuff |
I think This was my mini that I purchased from brickworx , and sold it last year ,if it is the one from albury / wodonga area that was just sold on ebay. you may give me a call on mob 0409541945 I can give you lots of information about it les jordan |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|