Where the front subframe meets the footwell is it reinforced on a moke!?

Does anyone have underside picture of where rear of front subframe mounts!?>

thanks

_________________
New from the UK and wanting a NICE little British car!

by 2 sheets of metal being overlapped... sure...

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...



“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

I thought their was a box section down their somewhere but I'm not sure if it's the same area.

_________________
Respect mine and I'll respect yours.

Yep, there's a box section there, sticks down about 2 - 2 1/2 cm at the front. Thats why there are holes in each footwell with one of the subframe mounting bolts down them.

Tim

_________________
1951 Morris Commercial J Type Van
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian

My `79 Moke has 5 patch layers above that...
I will fix it, when I get time and a round tuit...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Yeah, the moke floors are an inch "higher" than the mini floor pans,,, so there is a step "up" from the rear mounting point of the front frame, & yeah it`s sort of a box section where it mounts

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

If you want to look at my 67 moke at the set up your welcome. One side is still original and the other I have repaired/replaced. Both had some rust between the metal overlap

_________________
Research is the difference between speculation and investment. Anyone who copys some one else will always be second
www.minisprintgt.com