Ausmini
It is currently Tue Jul 22, 2025 5:51 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Gadgets mini
PostPosted: Wed Nov 25, 2009 8:34 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
Pulled the plugs today NGK BP6ES and the electrodes were covered in a light brown muck they were only oily on the threads.

Question is do i need to go hotter or cooler or stay the same ???

its a 1098

cheers

Simon

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Nov 25, 2009 8:36 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Are you running Valvemaster additive?
It really craps plugs up bad with brown sh!te...

A light brown to grey deposit is fine. A BP6ES plug is OK in most motors.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Wed Nov 25, 2009 8:38 pm, edited 1 time in total.

Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Wed Nov 25, 2009 8:37 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
yes Doc when i remember to add it :oops:

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Nov 25, 2009 8:39 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Gadgets mini wrote:
yes Doc when i remember to add it :oops:


I would seriously NOT run it. Use Flashlube, it's cheaper, and doesn't leave any crap there. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Wed Nov 25, 2009 8:43 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
Doc,
I just checked the bottle and it is Flash lube not the other stuff and i generally run Mobil premium in it

will it leave that muck if it runs lean??

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Nov 25, 2009 8:45 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Nope it shouldn't. Did you run Valvemaster before? More likely to run white if it's lean. If so I'd bung 4 new plugs in...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Gadgets mini
 Post subject:
PostPosted: Wed Nov 25, 2009 8:47 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
drmini in aust wrote:
Nope it shouldn't. Did you run Valvemaster before? If so I'd bung 4 new plugs in...


No pretty sure i have always run flash lube in it have run an ethanol blend a couple of times before i read here that it is not a good idea if running SU's

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D
Top
 Profile  
 
sgc
 Post subject:
PostPosted: Wed Nov 25, 2009 9:19 pm 
Offline
This space for rent
User avatar

Joined: Thu Feb 08, 2007 12:40 pm
Posts: 5455
Location: Melbourne
Gadgets mini wrote:
have run an ethanol blend a couple of times before i read here that it is not a good idea if running SU's


That's because the ethanol eats certain types of rubber, like the O-ring seal in the outlet from the float bowl.

Different brands of fuel will burn differently and leave different deposits.. personally I stay away from Shell and stick to BP Ultimate.

I have found that after lots of K's without cleaning, I get a little brown plaque on my plugs.. I am running Valvemaster additive though. Might give Flashlube a run and see if it clears up! Thanks for the tip, Doc :D

_________________
Simon

The adventures of an owner builder in the Tallarook Ranges

Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 75 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.