GT mowog wrote:
Hmmm.....dial 911 at the first sign of stroke. I'll have to remember that!
Not EVERY time you play with yourself......
| ausmini https://www.ausmini.com/forums/ |
|
| 2 hole dash template https://www.ausmini.com/forums/viewtopic.php?f=2&t=66311 |
Page 1 of 1 |
| Author: | fwank [ Thu Oct 14, 2010 1:39 pm ] |
| Post subject: | 2 hole dash template |
hello all, can anyone help with where i could find a 2 hole dash template? im in the process of trying to build a new dash for my clubman but the only templates i can find are pretty much 3 hole ones?? any help would be awesome!!! cheers.. jess |
|
| Author: | subwayseth [ Thu Oct 14, 2010 1:55 pm ] |
| Post subject: | |
by dash do you mean the vinyl backing on the firewall &bottom of the parcel shelf or a dash piece that holds two gauges? why not just drill only two holes if its to hold a gauge? |
|
| Author: | fwank [ Thu Oct 14, 2010 2:02 pm ] |
| Post subject: | |
no, its the holes that house the speedo and fuel gauge etc. instead of making the dash in 2 bits, i want to just have the one board with the 2 holes cut out, removing the cluster housing, i can do it the hard way and measure it up myself, but was hoping that someone has done it in the past. |
|
| Author: | subwayseth [ Thu Oct 14, 2010 2:10 pm ] |
| Post subject: | |
this should help: http://www.ausmini.com/forums/viewtopic.php?t=40484 |
|
| Author: | fwank [ Thu Oct 14, 2010 2:12 pm ] |
| Post subject: | |
thanks heaps!! |
|
| Author: | IwannaMini [ Thu Oct 14, 2010 2:36 pm ] |
| Post subject: | |
http://www.mediafire.com/?sharekey=d0cd ... f6e8ebb871 this has downloadable templates for dash and centre console and boot lining This guy wrote some good notes too on how to do it. http://www.theminiforum.co.uk/forums/in ... try1849337 |
|
| Author: | GT mowog [ Thu Oct 14, 2010 3:30 pm ] |
| Post subject: | |
IwannaMini wrote: http://www.mediafire.com/?sharekey=d0cd433132650c1375a4fc82078ae6c8e04e75f6e8ebb871
this has downloadable templates for dash and centre console and boot lining This guy wrote some good notes too on how to do it. http://www.theminiforum.co.uk/forums/in ... try1849337 Hmmm.....dial 911 at the first sign of stroke. I'll have to remember that! |
|
| Author: | IwannaMini [ Thu Oct 14, 2010 4:03 pm ] |
| Post subject: | |
GT mowog wrote: Hmmm.....dial 911 at the first sign of stroke. I'll have to remember that!
Not EVERY time you play with yourself......
|
|
| Author: | fwank [ Fri Oct 15, 2010 7:41 am ] |
| Post subject: | |
thanks M... should have just asked you in the first place!!! cheers! |
|
| Author: | IwannaMini [ Fri Oct 15, 2010 7:58 am ] |
| Post subject: | |
I have all the tools and stuff if you want to bring a chunk of wood to make one at mine. Not sure what garage space you have or what tools you have. This is how the one i did turned out.... 
|
|
| Author: | fwank [ Fri Oct 15, 2010 8:03 am ] |
| Post subject: | |
we started on the template last night, will hopefully start to "build" it on saturday, but if we get stuck i might head over, he is at kates place now, in the undercover car park, but so far so good, pretty sure we have all the tools, if not its just another excuse to head to bunnings which is about a 5 minute walk!! its awesome! are those the pics of maisey???? |
|
| Author: | fwank [ Fri Oct 15, 2010 8:05 am ] |
| Post subject: | |
PS, she looks amazing!!! |
|
| Author: | marc2131 [ Fri Oct 15, 2010 3:11 pm ] |
| Post subject: | |
IwannaMini wrote: http://www.mediafire.com/?sharekey=d0cd433132650c1375a4fc82078ae6c8e04e75f6e8ebb871
this has downloadable templates for dash and centre console and boot lining This guy wrote some good notes too on how to do it. http://www.theminiforum.co.uk/forums/in ... try1849337 Does a template for a centre bannicle speedo exists? (similar to that of a Cooper or K) |
|
| Author: | Wombat [ Fri Oct 15, 2010 3:53 pm ] |
| Post subject: | |
Use the above for the outline and cut your hole in the centre |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|