HI all as kevin said put up some links here as i was out testing the NEW 308 cam from graham russell just to see how it performed.
I recieved it fri3rd of june and frantically strated to asssemble the rest of the motor (being a motor of hi spec i wasnt going to take any chances with assmebly hassles), the motor was finished on the sunday with 2 days spare to insatall it and sort out any hassles i still hada day in hand to go out and give it a test drive, well that didnt work out due some some snotty nose little brats stealing my METRO that one of my guys uses to do work for me so i ended up spending half my tuesday running around sorting that out.
Wednesday morning the car was loaded onto the trailer for a dyno run to make sure everything is sweet before i go and hammer the daylights out of it on the track.
Dyno produced another 5kw (7.5hp) on the front wheels so wasnt too far off but was upset that it recons my car only had 55kw (76hp on the front wheels) but time would tell as figures really dont make a difference untill they are compared to other cars on the track.
I didnt even take the car off the trailer from wednesday and all i did was fit my ward mags and 10inch slicks over the uprated S brakes and headed up to taupo on the friday morning.
saturady the big event with over 70 cars from all corners of NZ rocking up it was going to be an interesting day, i had been warned to warmt he tires up and get the pressures right after a few laps so i took it out and it was horrible, so i bought it in and checked all the pressure and got them all even again and even worse, the problem was driving in a straight line it was jumping a full car width sideways at about 140km/h something was realy wrong and a seroius doubt came into my mind, I was told to check tyre diameter as no2 tyres are the same but as long as it was within 20mm the limited slip diff wouldnt pick it up, needless to say the 2 front tyres were 44mm different in diameter so i changed it for a tyre on the rear that was 3mm different andall problems solved.
Now i could actually drive the car and see what this cam is capapble of, im still smiling as there was not much out there in a straight line that had the speed and performance my car had, i just had to do something to keep up with the race boys on handling they would have the edge on the corners but not on the striaghts .
The car ran the whole day and other that getting the tempreture down a bit it never missed a beat and would do it again next week.
I havew a few links that have been posted up for me i hope you can watch them.
http://www.minicranks.com/taupo2005/elf&jai.avi
http://www.minicranks.com/taupo2005/elfchasingmat.avi
http://www.minicranks.com/taupo2005/lee.avi
just to note that black mini is a 1380, the elf is a 1380 the blue mini with 13's one is a minicranks 998cc.