Ausmini
It is currently Wed Jul 23, 2025 2:05 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 58 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
PostPosted: Thu Dec 11, 2014 10:52 am 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
guys my mini Van is ready to go to the shop, I'm having trouble identifying what it is for the guys at the motor reg dept.

I bought her as a rolling shell and need to try and find her previous plate number or chassis number, there are no tags and the only identifier I can find is the 18## stamped on the radiator shroud.

At some stage she has had the rear corners and front plate holder " customised". There was a "brickworks racing" sticker on the front window who i believe was a shop / club here in SA ?

Any one able to help me try and find out what model she is and what her chassis number is - i may then be able to find her plate number..

Or even better if a previous owner is on here??

David


You do not have the required permissions to view the files attached to this post.

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Last edited by VanMorrison on Thu Dec 11, 2014 12:13 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 11:25 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Mini K van.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 11:45 am 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
Thanks DrMini

So would that make her chassis / body number YJBAV4 18##?

Cheers

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 1:11 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Sorry, I'm not up on van body prefix, but yes the Mini King book says it is so.
It may be wrong though... most lists in non-factory books and on other Oz websites have errors. :lol:
[waits for morris 1100 or winabbey to log in...] 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 1:51 pm 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
Thanks - Will see what the others have to say... I'm praying someone say oh thats my old car and can tell me the old rego plate number....

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 2:17 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6750
Location: Melbourne, VIC
VanMorrison wrote:
So would that make her chassis / body number YJBAV4 18##?

That would be my guess. Other than Morris 1100, John Sneddon is a resident expert on car identification. He's compiling a database of the body prefixes, engine prefixes and relative numbers for Australian Minis so he could give an approximate delivery date for a body with 18xx.

Are there any holes in the front of the front subframe suspension tower? This is where the ADR compliance plate would've been fitted if it is a January 1970 or later vehicle. Initially there were four holes (one in each corner of the plate) and then two when a smaller plate was used.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 2:25 pm 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
nothing there as you describe, there is however 4 little holes under the wiper panel on fire wall on the drivers side where it looks a plate might have been at one stage?? I checked with motor reg here in SA and they tell me its likely it never had a plate but may have had one fitted at a later date when an engine change was done ( i doubt this though as if it had had an upgrade from 1100 to 1275 requiring an inspection i thought it would have had disk brakes? )

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 2:29 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6750
Location: Melbourne, VIC
Then it may be a 1969 delivery date. There were no ID or ADR compliance plates until January 1970.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 2:32 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6750
Location: Melbourne, VIC
This thread may be of interest - viewtopic.php?f=2&t=50764

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 2:56 pm 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
ok so I'm going with a 69 Mini K Van. unless anyone can prove otherwise..

now just need to find the old owner to find out the number plate details...

Thanks everyone

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 3:04 pm 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
OK so SA motor registration department has no records with the chassis/body number. They need either the original engine number or the old number plate details, back to square one...

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Thu Dec 11, 2014 6:27 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
winabbey wrote:
Then it may be a 1969 delivery date. There were no ID or ADR compliance plates until January 1970.

Vans and Mokes still had plates. Commercial Vehicles had to have a plate with a GVW.
Vans build before and after this one had plates.
There should be 4 rivet holes behind the master cylinders.


Top
 Profile  
 
PostPosted: Fri Dec 12, 2014 7:30 am 
Offline
848cc
848cc

Joined: Sat Aug 09, 2008 5:30 pm
Posts: 479
Location: Newcastle
Is there any letters/numbers stamped in the radiator shroud?
If it is a late 69 model van during the period of no build plate this will be the only point of identification.

_________________
John Sneddon
0408 431 807
1963 Morris Cooper
1965 Morris 850
1968 Morris Cooper S


Top
 Profile  
 
PostPosted: Fri Dec 12, 2014 8:31 am 
Offline
848cc
848cc

Joined: Mon Nov 24, 2014 11:47 am
Posts: 110
Location: Adelaide , South Australia
Hi John

Yes 4 numbers 18**

David

_________________
196# Morris VAN
2013 JGC 5.7 Hemi
2012 Civic Type R


Top
 Profile  
 
PostPosted: Fri Dec 12, 2014 11:38 am 
Offline
848cc
848cc

Joined: Tue Apr 20, 2004 3:33 pm
Posts: 434
Location: Bentleigh
Hiya,

I had a van that had the numbers stamped in the bonnet channel on the passenger side. Maybe check there too?

cheers! jon

_________________
MX5 NA Clubman (1993)
MX5 NB SE Turbo (2004)
MX5 NB8B (2001)
RS Focus (2016)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 58 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 85 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.