Has anyone ever installed these http://minikingdomonline.com.au/product ... sh-guards/

I am very confused

_________________
1968 Morris Mini Cooper S

I have. Three clips per side are screwed in to the headlight retaining ring. I bent the clips a little to hold the mesh on better

_________________

I've had them on my clubby for years with no broken glass to date. The above pic from timmy201 shows fitment.
If you angle them slightly you can get a subtle angry-eyes look, or sad if you go the other way.

_________________
1.8L Sunshine - Legal, legit & lovinit

Thanks ill have a go again tonight

_________________
1968 Morris Mini Cooper S

I prefer the mesh guard that sits under the headlight ring without clips

are the ones you are describing the actual mini ones though?

Oldblade I have the ones that sit under the headlight rim willing to sell you a set.

_________________
That's why it's good to be.............ME

I had trouble fitting them up to my Clubman when attempting to fit them as timmy has. they would not fit behind the headlight surrounds/grill, even when i cut the clips down to pull the covers further back to the headlight. I ended up attaching them to the headlight surrounds and it still looks pretty good

I have this type... one time I had a filament go so replaced the light with a newie, then I looked at the difference between the new light and the old light on the other side and OH MY GOD THERE WAS A LOT OF CRAP ON THE LIGHT!!! the mesh makes it pretty hard to clean the headlights

_________________
did I tell you that I won a trophy?

I have already bought them it was one of those "that might look nice" purchases. After trying to fit them they may end up on the garage wall[SMILING FACE WITH OPEN MOUTH AND TIGHTLY-CLOSED EYES]

_________________
1968 Morris Mini Cooper S

I did some modification of the clips with some needle nose pliers to get them to stay on better.

_________________

Thanks

_________________
1968 Morris Mini Cooper S