Yep. They don't come with any.
I'm beginning to think the noise may not be the brake pads. It maybe something vibrating caused by the engine/driveline vibration when braking lightly. I am going to try and get a video tomorrow to assist with the diagnoses.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

Well I finally found the culprit. It was the front lower valance being vibrated by the exhaust manifold when the engine rocked a certain way during braking and while in gear. It was a pain to find as I couldn't replicate it at a stand still.
It had a 2mm gap but clearly not enough. Out come the jemmy and all fixed.
Phew. Not a brakes or drive chain problem.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255

Don't forget to seal that edge.

_________________
Nick

http://www.ausmini.com/forums/viewtopic.php?f=3&t=86675

Yep. All edges were sealed.

_________________
Website: http://www.dutchysmini.com/
Facebook page: https://www.facebook.com/Dutchysmini/

Previously owned the Red VTEC Mini (B16A)

Project currently on the go:
1961 Morris mini
Engine conversion - WRX EJ255