I have to remove the rear subframe from my clubman due to damage (its why i failed my blue slip) ... i have another one from my roundie. Two questions:

1. Will it fit my clubman?
2. Is there much involved in the change-over?

Lucas

1. Will it fit my clubman? is the replacement from a wet roundie?? then yes...
2. Is there much involved in the change-over? fuel and brake line dissassembly and 4 bolts....

_________________
"Show me the Mini!"

and you need to get in past the tank for the nuts on the rear of the subfram
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

A wet or dry rear will fit and vice versa. Disconnect steel brake line from limiting valve. Disconnect fuel line from tank. Remove tank. Disconnect handbrake cables (either at the drumbrake end (messy) or front the handbrake mechanism in the cabin. Support Subframe of raised rear of car. Undo 8 bolts lower subframe and remove. Installation is the reverse of extraction

_________________
225hp atw on 14psi. 1/4 Mile no idea. Take one 1971 Mini Clubman, one Starlet GT Halfcut, Simmer over a warm MIG Welder, and Voila Minstar! www.mpdesign.id.au

sweet guys. ill get onto it next weekend and see how i go
hopefully might even get a blue slip next week
cya
lucas