Just wanting to confirm the correct wheel nuts for the Australian Clubman GT.
At the moment I have two different wheel nuts.
Which would be correct in the below photo - Thanks

This might help. Would be a good idea to measure the taper to confirm they are 60 degrees.



https://www.ebay.com.au/itm/28170611858 ... ybU5Sf1_y9

https://www.minispares.com/cn2-wheel-nu ... at-1984-on

There's an extract from the AHA8785 engineering drawing showing the precise measurements in Tony Cripps Mini Clubman and GT engineering series book.

https://www.leylandaustralia.com.au/shop.htm

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

The one on the right looks like it would be a universal aftermarket part due to the number 5 on it.

_________________
1986 Mayfair (998 auto), 1974 S, 1974 Van, 1972 PMG Van

Too many minis

They appear to be the same as the ones used on Moke Californians with sunraysia wheels, but there are some interesting comments on the MokeWerx website about reproductions and later UK wheel nuts that apparently have the same 60° angle but different seat areas.

https://www.moke.com.au/in-the-garage/135-wheels-and-tyres/395-sunraysia-wheel-nuts

Now I'm wondering about the set of supposedly NOS sunraysia ones I have...

Tim

_________________
1951 Morris Commercial J Type Van
1955 BSA C11G
1961 Morris Mini Traveller
1969 Triumph TR6R
1977 Leyland Moke Californian