I know i have asked this before but how would i go about repairing my clubby s flares? they are cracked and a tad broken where the flare toeches the body....any help would be appreciated.

_________________
I have a problem.. apparently

I have some old ones like that.. but I think the only real cure is get new ones! They are so flimsy...
Only other possibility I know is put a layer of Sikaflex 291 onto the body and bed it into that. I've done this with an Inno one, but they are thicker.
BTW you can paint over the Sikaflex if you need to.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Buy new ones. Not worth the hassle to fix em.

Cheers

Aaron

_________________

i was dreading that response arent they pretty excpencive (im a student)

_________________
I have a problem.. apparently

mine are sorta cracked at the bottom and a bit flimsey, and they dont fit in place all that good too. gotta replace them when i get money

haha isnt that always the way but at least im getting my primer and spray putty at cost price and my paint for free and i like to brag yaaaay

_________________
I have a problem.. apparently

what sorta paint is it? what colour u spraying it? how you getting the paint for free?

social i got a set i just remove from the bitch 40 bucks for the 4 ???
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

its a candy purple....thats all i know, mums friend has it left over and offered to paint the beast for me.


Sorry to be a pain, but do you have a pic? are they in good condition? And would it be too much of a hassle to post them? cos im not one to like driving....i will pay postage costs

_________________
I have a problem.. apparently

i have to drop traceys uncles trailer at camden i'll do a flier out to you while im out there pm me your address
makka

_________________
Anonymous moderation means the agro that is built up towards the mods isn't aimed at an individual (fewer "Makk" attacks). Less stress for mods means less moderator "retirements".

hope you like it

Me Too! lol

_________________
I have a problem.. apparently

whatayarekon
im thinkin of buying some fibreglass flares for 100 bucks including postage from melbourne.
good price?

there are also some plastic "dome" (whatever that means cus there all dome) flares $77-80 per kit. or u can buy them singularly from $23-70 both prices Inc GST these are new too which is a plus. chek em out at http://www.agradepanels.com.au/new_parts.html
these were the cheapest i could find new.
Have fun spending guys

_________________
My rides-74 fj40
74 clubman hopefully rego'd soon....
and 76 clubbie van!! - Ratschite after what i found what it was covered in when i found her...
http://photobucket.com/albums/b44/minimechanic/?sc=1

pretty expencive for a crappy little bit of plastic, but hey, it makes a mini look cool!...or should i say cooler i am so proud of mine and right now it looks like a peice of sh1t but still a mini

_________________
I have a problem.. apparently

The ones I pulled off the clubby seemed a bit cracked at some of the screw holes. I was going to araldyte them up a bit and then paint over it (?). They're black though so it's easy to mask a fix up from viewing distance.

Shard