Ausmini
It is currently Sat Jul 19, 2025 6:42 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
Fat80y
 Post subject: Starter motor sticking
PostPosted: Mon Nov 14, 2005 10:05 am 
Offline
848cc
848cc

Joined: Mon Nov 01, 2004 12:36 pm
Posts: 149
Location: Dubbo, NSW
My starter is spinning, but not engaging with the flywheel. I assume the bendix gear is sticking. What's the best way to clean and lube this?
Top
 Profile  
 
marcsvenson
 Post subject:
PostPosted: Mon Nov 14, 2005 10:07 am 
Offline
998cc
998cc

Joined: Sun Apr 03, 2005 3:10 pm
Posts: 891
Location: Brisbane, West Siiede
i think i got told metho to clean cant remember i just took mine to autoelecyy hows the bearinigs etc
Top
 Profile  
 
Flying Brick
 Post subject:
PostPosted: Mon Nov 14, 2005 10:17 am 
Offline
848cc
848cc

Joined: Mon Apr 11, 2005 1:18 pm
Posts: 227
Location: Canberra ACT
I had the same problem on the weekend, I just gave the shaft a hit with fine wet and dry and then a light smear of grease. Alright so far.
Steve.
Top
 Profile  
 
Fat80y
 Post subject:
PostPosted: Mon Nov 14, 2005 11:23 am 
Offline
848cc
848cc

Joined: Mon Nov 01, 2004 12:36 pm
Posts: 149
Location: Dubbo, NSW
Haven't pulled it out yet so don't know what condition bearings etc are in - if it is stuffed I'll be putting a gemini one in anyway...

I was always told not to use grease? as it mixes with the clutch dust to make a grinding paste and wears things out faster? I was thinking some kind of graphite powder or other dry lube maybe?
Top
 Profile  
 
Flying Brick
 Post subject:
PostPosted: Mon Nov 14, 2005 12:47 pm 
Offline
848cc
848cc

Joined: Mon Apr 11, 2005 1:18 pm
Posts: 227
Location: Canberra ACT
I didn't put much grease on at all, just a light film, but I think you could be right. Oh well, if it breaks I will know not to do it again. What are the advantages of using a Gemini starter on the mini, I have one lying araound somewhere.
Steve.
Top
 Profile  
 
Fat80y
 Post subject:
PostPosted: Mon Nov 14, 2005 4:40 pm 
Offline
848cc
848cc

Joined: Mon Nov 01, 2004 12:36 pm
Posts: 149
Location: Dubbo, NSW
I think mainly to get rid of the problem I have here - It is the pre engaged type. Also it has more torque, being of newer design and for a larger engine. People I have spoken too say it spins the motor over like there's no spark plugs in the head!!!
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Mon Nov 14, 2005 7:53 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
If it spins but does not engage the ring gear it could just need a lube or it could mean that the bendix gear has split and died :shock:
Pull the starter and check the bendix.
Top
 Profile  
 
9YaTaH
 Post subject: and the ring gear..
PostPosted: Mon Nov 14, 2005 8:03 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Morris 1100 wrote:
If it spins but does not engage the ring gear it could just need a lube or it could mean that the bendix gear has split and died :shock:
Pull the starter and check the bendix.


and the ring gear....sometimes they can get very gnarly and reject the advances of Miss Bendix... :roll:

Morrie :!: have you checked your answering machine :?: (tapping foot :lol: )

_________________
"Show me the Mini!"
Top
 Profile  
 
Morris 1100
 Post subject: Re: and the ring gear..
PostPosted: Mon Nov 14, 2005 8:07 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
9YaTaH wrote:

Morrie :!: have you checked your answering machine :?: (tapping foot :lol: )

Don't tap your foot, you will blow the pistons out of the wheel cylinders! Sorry Mick, no spare drums. :cry:
Top
 Profile  
 
9YaTaH
 Post subject: Re: and the ring gear..
PostPosted: Mon Nov 14, 2005 8:43 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Morris 1100 wrote:
9YaTaH wrote:

Morrie :!: have you checked your answering machine :?: (tapping foot :lol: )

Don't tap your foot, you will blow the pistons out of the wheel cylinders! Sorry Mick, no spare drums. :cry:


ewwhhhh.....tah....only if you are really heavy footed :roll: ......any ideas on where to get drums?? they are bigger than Minis aren't they :?: :?

_________________
"Show me the Mini!"
Top
 Profile  
 
AJ
PostPosted: Tue Nov 15, 2005 10:31 am 
Offline
998cc
998cc
User avatar

Joined: Sun Sep 11, 2005 12:41 pm
Posts: 911
Location: Bunbury WA
Fat80y wrote:
My starter is spinning, but not engaging with the flywheel. I assume the bendix gear is sticking. What's the best way to clean and lube this?


Clean it with Metho or Solvent and lube it with dry graphite , never put grease or oil on , it only attracts all the dirt and you end up with that same problem

_________________
1965 Morris 850
1966 Morris Mini Minor
1967 Morris Cooper 'S'
1977 Leyland LS
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 75 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.