ausmini • View topic - Are the drive shafts the same for both uni and pot joints?

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Are the drive shafts the same for both uni and pot joints?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Bromley

Post subject: Are the drive shafts the same for both uni and pot joints?

Posted: Fri Dec 30, 2005 3:16 pm

998cc

Joined: Wed Feb 09, 2005 7:20 pm
Posts: 833
Location: WAGGA

Got some new CV's and wondering if the drive shafts I have formerly used with uni joints will accomodate a pot joint.

Thank you.

Top

9YaTaH

Post subject: different

Posted: Fri Dec 30, 2005 3:21 pm

1360cc

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia

Andy .....pot joints need the correct output shfts...another problem for you.....Happy New Year

_________________
"Show me the Mini!"

Top

Bromley

Post subject:

Posted: Fri Dec 30, 2005 3:23 pm

998cc

Joined: Wed Feb 09, 2005 7:20 pm
Posts: 833
Location: WAGGA

So they have a different type of spline on the end? Wish I had one of each to compare (trip to Tims???)

By the way, hanks for that link Mick but I think second hand is cheaper. Might post on here for a few actually.

Top

9YaTaH

Post subject: just another photo....

Posted: Fri Dec 30, 2005 3:29 pm

1360cc

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia

Bromley wrote:

Yeah...go see Tim and ask to see a pot-jointed gearbox.....there is a thread or two here explaining what you have to do....not easy...but worth it.

The link was to show you that any fool with a hacksaw and file could make those door spacers ....as I suggested :!:

(Caveat: any inference that Brom is any fool is unintentional and regretted

)

_________________
"Show me the Mini!"

Last edited by 9YaTaH on Fri Dec 30, 2005 6:19 pm, edited 1 time in total.

Top

drmini in aust

Post subject:

Posted: Fri Dec 30, 2005 3:36 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW

Pot joint shafts are both longer, and have a different spline (and a circlip groove) at inner end than the others. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Bromley

Post subject:

Posted: Fri Dec 30, 2005 3:54 pm

998cc

Joined: Wed Feb 09, 2005 7:20 pm
Posts: 833
Location: WAGGA

So I have disk brake CV's (for the disk brakes) and drive shafts.
I have discovered that the later style pot joint g/box is better and easier to find

Quote:

Pot joint shafts are both longer, and have a different spline (and a circlip groove) at inner end than the others.

Therefore I need to find pot joint style drive shafts for the cv joints instead of using the ones that came with the brakes?

[/quote]

Top

drmini in aust

Post subject:

Posted: Fri Dec 30, 2005 3:59 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW

yes. The shafts just pop out of CV after you smack them smartly with a BFH.. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Page 1 of 1

[ 7 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 131 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: