Ausmini
It is currently Fri Jul 18, 2025 3:35 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3  Next
Author Message
PostPosted: Sat Jan 14, 2006 2:08 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
the boot floor in the vans well there is that large cavity behind the seats which is unused well i was woundering if anyone has ever cut that part of the floor out cause i was thinking of doing this and then making like 2 large storage spots there just make up some mdf boxes with a lid so u can open them then the spacei snt wasted what do u people think of this? if u understand what i am trying to say lol


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 2:59 pm 
Offline
998cc
998cc
User avatar

Joined: Thu Aug 11, 2005 11:01 am
Posts: 1001
Location: And That's No Bull
But where are you going to put the battery and the spare wheel :wink: ?

_________________
ImageImage
Opinions expressed by me are of my opinion only and are copyrighted to Kinkabell Corporation? 2006.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 2:59 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Feb 09, 2005 7:20 pm
Posts: 833
Location: WAGGA
I understand. But the cavity behind the passenger seat is for the spare wheel. I think the best spot for tool bins in along each side.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 3:00 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Feb 09, 2005 7:20 pm
Posts: 833
Location: WAGGA
Is that your van in the avatar? - There are a few of us on here working on vans at the moment, and many more with ones that need no work.

Send through some pictures


Top
 Profile  
 
 Post subject: my van
PostPosted: Sat Jan 14, 2006 3:02 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
na its not in the avatar. thanks for the tips ay yer i am a bit of a noob on the van i thought the spare and battry went there but relly had know idea lol thnks guys i still might make then and then put the spare and battry in one.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 3:04 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
i will send so pics soon as i can ok


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 3:38 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
here are pics of my van whats there anyways
Image
Image
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 4:47 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed May 11, 2005 10:31 pm
Posts: 3747
Location: Altona, Melbourne
sweet gonna have a flip front? Is that a moke you've got too?


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 5:58 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
oh it was cut for a flip frount but the way it was done was very very bad so i am just goin to buy new panels and take it bake to normal
yer thats me old mans moke and thats bit of blue is my 62 850 but its got an 1100 engin in it and omg that engin is the best bilt buy a guy called paul gulson he used to race and own a mini resto company here on the gold coast goes very hard


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 7:26 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Ow is that a clubbyVan turning into a Roundy :wink:
Hmm..just thinking of what you are saying and cutting out the top section or floor behind the driver or passenger storrage area. I'm not likeing that :twisted: Do we think this may weaken the frame :idea: I know the traveler has this but does it have additional strengthing instead :?:
Just a question :shock:

I also have a van and you can check it out on my Photobucket also :wink:

Not much has happened of late :? but intened to some more soon :wink:

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 7:32 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
yer i dont think it will weaken it but then i dont really know and na its a genuine roundy i dont do those doggy jobs na lol

its just there is so much space there and i want to use it ay


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 7:38 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Well, it was a guess as I was looking at the front Shocks :wink:
Seen as you have a weber/Dellorto box are you use one also and what engine and spec's you doing

Hay you also have anothe Round..whats the goss thier..Three Mini types.. 8)

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 7:48 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
well the van is something i havent really started ay so not sure about the motor but yer there is a purple moke there and thats my blue roundy its a 63 850 but its go a fully worked 998 in it bored out to just over 1100 um yer did full body respry the body is one of the best in aus and thats no bull crap the body had no rust and not a dent on it yer every thing in it is new every thing was bought from the uk and yer it was on the dyno coupe of months back and it hasnt been fin tunred but its kw topped 61 so i was very very happy with that. anything else u want to know??


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 8:37 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Hmmm..Where are..can you fill in your profile..Interesting..read and now that you say it has the best body..I?We want pic's
you say you have a 998 out to a 1100.I'm guessing thats the bore and that means it does not have a 1100 crank :idea:

61KW..what that in HP and is this at the flywheel or the wheels ....Recently..well last year the sydney guys we had a dyno day and the top Hp was 46.8HP

I know of Paul Gulson and his work on Mini's but 61 KW out of a 998 :shock:

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jan 14, 2006 8:58 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jan 11, 2006 9:17 am
Posts: 162
Location: gold coast
yer i got 61 at the wheels i have the dyno sheets and stuff in hp i not sure but that run was done in 4th gear i c at those mini dyno days they tend to do the test in 3rd i think.
yer what paul has put in the motor i realy aint to sure on but what ever he did i love it he always wanted to do the mini and then we decided and we told him and he was stoked yer paul was the one who told us it has the best body he has ever seen.
i will get some pics soon i think i have some older ones i have a look

oh i am on the gold coast


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 35 posts ]  Go to page 1, 2, 3  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 87 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.