Ausmini
It is currently Thu Jul 24, 2025 6:36 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Fri Apr 07, 2006 10:21 pm 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
Im looking to purchase the above car. I have been to have a look at it. The car is in very good shape from what I can tell, runs, and is straight, but I found the following problems:

1. Boot has three rust holes, (whole boot could be rusted)
2. Doors have a little rust on bottom corner, appears to be semi surface rust but hard to tell
3. Had a small accident which has been repaired and all lines/chassis are straight etc,
4. New Windscreen needs to be put in
5. Spits a bit of oil from exhaust

Im looking at changing the engine in the future anyway but im just listing what I noticed was wrong with it. Any advice on the above would help, but mainly interested in the fixing of the boot as I believe the rest is not much to worry about (correct me if Im wrong). Asking price is $700 so from what I have seen I believe this is a good deal. Cheers all, Adz.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 10:29 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Snap it up, $700 is CHEAP.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 10:56 pm 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
And what do you think about the issues it has?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 10:59 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Very common for a car of such age.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:01 pm 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
Is it anything to worry about? Like the rusted boot floor? Or can these things be easily fixed?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:03 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Can be replaced by a panel shop, or plated over by yourself (if you know how to weld)
Its not really a structural issue.

(i'm guessing anyway :lol: )

Lets see some photers.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:04 pm 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
I would but I got no where to host the photos.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:11 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
wgormly @ hotmail.com




go on.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:33 pm 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
cant they are 10mb...lol. Ah well. Its been resprayed lime green


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 07, 2006 11:56 pm 
Offline
1360cc
1360cc

Joined: Mon May 03, 2004 6:46 pm
Posts: 13688
Location: ADL
Image

Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 08, 2006 12:48 am 
Offline
848cc
848cc

Joined: Wed May 05, 2004 12:29 am
Posts: 157
Location: adelaide,soon to be darwin
for $700 you cant go wrong

_________________
off to NT I go


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 08, 2006 1:39 am 
Offline
1275cc
1275cc
User avatar

Joined: Wed Mar 17, 2004 12:16 am
Posts: 5717
Location: Adelaide SA Ausmini Sales Department
Lift alll the carpets to check for rust, if you havent already done so. And also, open the rear side windows and check along the bottom seal for the same. Pull the seal off the flange if you must.

Check that the body numbers match the plate numbers aswell.

Looks like it is leaning to the drivers side..... hydrolastic suspension??????

_________________
[NATHAN] -- Sold everything mini related and am back in big beautiful BMWs
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 08, 2006 9:09 am 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
what is hydro suspension?


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 08, 2006 9:17 am 
Offline
1275cc
1275cc
User avatar

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD
If it is a 1977 it shouldnt have hydro - springs are probably collapsed. Cheap enough to replace though

Hooroo

Rob Forsyth
Miniot!!

_________________
Rob Forsyth
Miniot!!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 08, 2006 10:21 am 
Offline
848cc
848cc

Joined: Mon Apr 03, 2006 6:14 pm
Posts: 66
Location: Melbourne
yeah i suppose i am a lillte worried about the small accident its had, but im sure its near imposible to find a 30 year old card that hasnt had one.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 104 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.