Hi,

I've got to look into freight costs for a 1275 from QLD to GRs place in sydney. I need to know some weights to get prices.

1275 Block - Bare (from 1100s)
Rods with Pistons
Crank

Any help?

Cheers
matt

http://www.ausmini.com/forums/viewtopic ... ht=#243424

might be worth contacting justmini as he is going past GR's place on his trip down.

Cheers


Aaron

_________________

Thanks,

But steve looks like he may not be going now!
Hence the need for freight pricing!

(i needed to freight it home anyway!)

Cheers
matt

So anyone got the weights handy?

Doesn't need to be exact within a Kg is close enough for me!



Matt

anyone?

Leave me a note, I'll be back monday. Ahh, weekends....

Matt

Might pay you to ring GR and find out if he has someone he uses and if so use them both ways

Jon

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

Just so anyone else who wants to send there block somewhere (GRs for example) can work out the cost;

1275 block (1100s based)
Crank
Rods
Pistons
cam
(assembled)

Packed in a extra H/D box with ply underneath and at the ends.

Weighed 56kgs


The other box with flywheel(3.7kg), clutch assy, engine backing plate new pistons and harmonic balancer was 10kg packed.


Freight to Russell Engineering from Warwick in QLD was about $80.00


Hope this comes in handy for someone!