So i just stumble over ANOTHER person wanting to chop the front
off a Clubman to put a round-nose front on it..

if u want a bloody round nose, go stop
being a tight arse and buy one....

If u dont like clubmans, thats fine just DONT BUY ONE IN THE FIRST PLACE.

I am getting sick and tired of people thinking it is humerous to chop the front
off a clubman shell to replace it with a round nnose..

This is not a post to say one is better than the other.. merely just to say stop
destroying clubmans

Funny how they can't bear to have the Clubman front but they don't mind sitting behind a clubman dash.

How many 1100S' are left with their 1275 motors? The same bastards that want round nose clubbies also have to have a 1275.

I think I might fit the Cooper S dash to my LS. (and while I am at it I may fit the Cooper S 1275 to my 1100)

oh and michael this is the part where even though that was obviously said tongue in cheek... i say that if i find u did that to the LS i would come to canberra and hurt u

those who remove a Clubman front to fit a roundy front thing are admiting that a Clubman body is superior to a roundy body

_________________
Website: www.justanothermini.com

Mate, you should see my LS! It can't get any worse! (Now where did I put the angle grinder?)

true-er words were never spoken Anton!

Michael i have packed my bags and am comming to canberra tp hurt u then!

While you are down here you can take the Clubman front with you!

maybe i can have the middle and rear as well...

Actually I prefer the Clubman front. It has almost enough room under the bonnet, nearly as good as the Morris 1100.

My LS is coming along slowly. I removed all the rust and all I was left with two subframes and a motor.

and following that line of reason, they are also confirming......



Come on, it was just a joke!

_________________
One should never skimp on the zip ties.

No, probably they just happen to have a Clubby body that hasn't succumbed to the rust monster yet. At least from A pillars back.

I don't mind a Clubby front, but our Clubby van might yet get a Mini K dash with the speedo where Issigonis intended- as there's nothing in there, and we just happen to have a mint one.
Jury is still out though......

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

i dont mind people doin that to the interior.. after all the early povo pack clubbies
has that roundnose set up

but structurally changing the car via the front end shites me

Fire up Chris

_________________
Bob Slattery
Duffman Says A Lot of Things - OH YEAH!!

His running on all four cylinders!!
Good onya Chris

_________________
_______________________________________________________________________________

Hmm might go cut Lillee's front and put in a clubman front end

_________________
Lillee - 1969 Morris Mini K