ausmini • View topic - valve clearence

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

valve clearence

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

monkey

Post subject: valve clearence

Posted: Fri Jun 30, 2006 5:56 pm

848cc

Joined: Sat Aug 28, 2004 9:40 pm
Posts: 236
Location: Central Coast NSW

hey

just wanted to know the suggested valve clearence for an 1100 engine? tappet gap...
i think ino what i'm talking about :roll:

and i would also like to no the spark plug gap?
my mini isn't running all to well, so just going through it all.....

thanks in advance guys and girls

Cheers James

_________________
'75 windowless van
~LOLA~

Top

drmini in aust

Post subject:

Posted: Fri Jun 30, 2006 8:14 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

.012" cold is standard rocker clearance.
Spark plug gap .025" with standard ignition.
:wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

monkey

Post subject:

Posted: Fri Jun 30, 2006 8:53 pm

848cc

Joined: Sat Aug 28, 2004 9:40 pm
Posts: 236
Location: Central Coast NSW

doc ura champion :!:

_________________
'75 windowless van
~LOLA~

Top

9YaTaH

Post subject: The Doc

Posted: Fri Jun 30, 2006 9:22 pm

1360cc

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia

Easy for him to say....quoting standard, out of the book tolerances....and him, with Pulsar dissys...Toyo rockers...and who knows what else he has adapted to make the A Series twirl better :!:

_________________
"Show me the Mini!"

Top

kazjim

Post subject:

Posted: Fri Jun 30, 2006 9:35 pm

1098cc

Joined: Tue Apr 06, 2004 2:49 pm
Posts: 1556
Location: Central Coast, NSW

"doc ura champion "

You saying our Doc has a head like a Sparkplug ?

(Doc in his natural Environment....)

(he he he, sorry kev!)

J

_________________

Top

CPOCSM

Post subject:

Posted: Fri Jun 30, 2006 11:34 pm

1275cc

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD

Nice buzz cut there Kev - I have never been able to master the Mk 69 yardglass - tends to end up all over me(well the contents anyhoo!!)

Hooroo

Rob Forsyth
Miniot!!

_________________
Rob Forsyth
Miniot!!

Top

gafmo

Post subject:

Posted: Sat Jul 01, 2006 8:53 am

the King of Bling

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills

Yep Kev likes a beer or two

_________________
Stop Licking the Dog...I Don't Care Who Started It

Top

drmini in aust

Post subject:

Posted: Sat Jul 01, 2006 10:21 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

wasn't MY yardglass, it was Josh's... :lol:

I hate em too Rob. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

monkey

Post subject:

Posted: Sat Jul 01, 2006 12:22 pm

848cc

Joined: Sat Aug 28, 2004 9:40 pm
Posts: 236
Location: Central Coast NSW

one more question is 0.012'' for both inlet and outlet??

Cheers James

_________________
'75 windowless van
~LOLA~

Top

drmini in aust

Post subject:

Posted: Sat Jul 01, 2006 9:58 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW

Yes.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Page 1 of 1

[ 10 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 85 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: