Ausmini
It is currently Sat Jul 19, 2025 3:44 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Matic interior
PostPosted: Tue Nov 02, 2004 7:20 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
http://www.ozcooper.com.au/australian_m ... chures.htm

if you scroll down to the matic advert
near the end, there are the words: "The interior is strictly Mini Deluxe"

my interior has no 3guage binnacle
just the centre speedo

the car has original log books and has did 30,000 miles when bought,
matching numbers

you can tell me the truth, it wont hurt:
1) possibility of phasing MK1-MK2 component switching (eg using only centre speedo)
2) one owner in the past didnt like the cluster so took it out - what does a 3 guage frame consist of? is it a black piece that fits neatly over the exising yellow plastic centre unit?

bought in early 69 no manufacture date anywhere (including plate),
speedo and wiper say 68.

thanks

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 02, 2004 7:43 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu May 13, 2004 4:41 pm
Posts: 4418
Location: sydney
I wouldn't be too concerned that it says strictly mini deluxe. I am pretty sure that they came out std with a centre binacle only anyway, it wasn't until the K's that they got the 3 guage setup. I am probably wrong. You could check by having a look at what wiring exisits behind there, if there are conectors for extra guages then it has been swapped, but i doubt it. the plastic bit is a completly different setup. you replace the plastic, nto put it over the other one.

Cheers

Aaron


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 02, 2004 7:47 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
thanks aaron
the set up in the engine bay seems all original no extra wires and the single yellow plastic seems like its been there the whole time

if you look at Steve's "Slidey has new tacho and boot lining" (Gallery) picture
if you were to swap to the 3guage, youd have to replace those two surrounding vinyl mats inside as well - too much trouble?

hmmm

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 02, 2004 8:10 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
I believe the first MiniMatics had Mini Deluxe speedo pod, then when the so-called MK2 MiniMatic came out (1968?) it used the Mini-K binnacle.
I had 2 `matics- a `69 and a `70 and both have the 3 clock setup. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 02, 2004 8:12 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
The Mini Deluxe only had the centre speedo (in Oz spec). The three gauge Cooper style binnacle did not come on a non-Cooper until the Mini K in March 1969.

So your matic is original. 8)

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 02, 2004 8:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
i knew someone would know the answer
this forum has everything: mechanical, production facts, detailing
im proud of you fellas n fellarettes

1969alloriginalmatic (now californian moker) and i had this discussion... couldnt come to a conclusion

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.