Does anybody know if a inline washer pump motor is available, basically i want to run the original washer bottle in my van, so basically i want a pump to go in the hose between the washer bottle & jets. Does such a beast exist?

Doogie

_________________
I won Hay once, here's the pic to prove it..


Hay, it's not about the car, it's not about the venue, it's about the people that come here. Peter Dwyer, Mayor of Hay NSW.

Yes, they do exist. I got one a while ago for my Morris 1100. I got it from a spare parts place somewhere.
I stuck it behind the dash to keep it looking stock. It didn't work! They need to be mounted lower than the bottle to keep the pump primed. I had a non return valve in the line but it still managed to flow back and you needed to prime the pump to get it flowing again.
I went back to the stock plunger pump. I will get around to trying it again one day.

Some jap cars have a pump in the bottom of the washer bottle that just push into a grommet, you can pull them out and fit a hose on the inlet side.

Yes, AutoPro and the like have generic pumps.
Expect to pay about $20 though!

_________________
Too many cars, and too little time.