Ausmini
It is currently Thu Jul 31, 2025 3:03 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
birty
 Post subject: Removing Dashboard
PostPosted: Mon Feb 12, 2007 2:50 pm 
Offline
848cc
848cc

Joined: Mon Nov 06, 2006 10:45 am
Posts: 193
Location: Canberra
Hi there everyone,

My two mini manuals don't give me much of a clue in regards to removing a mini clubman dashboard - ie all sections as my mini is going in for a full strip and repaint.

For the top section I have removed the two side nuts (ie one on each of the ends) but the dash still seems quite firm. I take it that there may be others maybe in the middle but have yet to find. I just read somewhere about removing the ash tray and finding a nut in there - is that correct?

Any help much appreciated! :oops:

_________________
Cheers,
Rob.
Top
 Profile  
 
czerial
 Post subject:
PostPosted: Mon Feb 12, 2007 3:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Oct 15, 2004 2:46 pm
Posts: 5281
the windscreen needs to come out mate. and there are 4 or five nuts for memotry. the ones on the sides and then some in the middle section - not really the middle as such but towards there.

The bottom one has a chrome strip and some clips under that. but is [redominatly held on with glue. so u just have to be careful when taking it offskies.

cheers
chris
Top
 Profile  
 
cush
 Post subject:
PostPosted: Mon Feb 12, 2007 3:25 pm 
Offline
THIS SPACE FOR RENT
User avatar

Joined: Wed Jun 09, 2004 3:35 pm
Posts: 11847
czerial wrote:
the windscreen needs to come out mate.


:shock:

_________________
Image
Top
 Profile  
 
birty
 Post subject:
PostPosted: Mon Feb 12, 2007 4:19 pm 
Offline
848cc
848cc

Joined: Mon Nov 06, 2006 10:45 am
Posts: 193
Location: Canberra
Yep - all glass is already out of car. Will have to have a closer look and feel around from below. Probably obvious but missed them somehow.

Cheers.
Birty

_________________
Cheers,
Rob.
Top
 Profile  
 
Marvin
 Post subject:
PostPosted: Tue Feb 13, 2007 9:51 am 
Offline
resident alien
resident alien
User avatar

Joined: Fri Dec 31, 2004 1:08 pm
Posts: 3278
Location: Outta this world!
czerial wrote:
the windscreen needs to come out mate

No it does not... I removed and replaced mine with the window in!
Top
 Profile  
 
birty
 Post subject:
PostPosted: Wed Feb 14, 2007 8:47 am 
Offline
848cc
848cc

Joined: Mon Nov 06, 2006 10:45 am
Posts: 193
Location: Canberra
Thanks all - yep, there were four nuts to undo with two offset from the centre. I would think that you could get the dashboard off without the windscreen but without a windscreen it sure would be easier to remove the console etc.

Must have had a previous windscreen in in the past as I found lots a glass shards sitting underneath the top dash.

_________________
Cheers,
Rob.
Top
 Profile  
 
GT
 Post subject:
PostPosted: Wed Feb 14, 2007 8:58 am 
Offline
1098cc
1098cc

Joined: Thu Aug 17, 2006 10:23 am
Posts: 1621
Definitely a windscreen out job :lol:

It's a bitch with windscreen in.
Top
 Profile  
 
Rodney
 Post subject:
PostPosted: Wed Feb 14, 2007 4:49 pm 
Offline
1275cc
1275cc
User avatar

Joined: Mon Oct 25, 2004 9:52 am
Posts: 2027
Location: Clifton Springs, Victoria
It is possible to get the top dash rail out with the windscreen still in. When you put it (or a nice new one ) back in though, you have to be very careful not to tear the roof lining down the A pillar. Would certainly be easier to do without a windscreen to hinder your progress though :roll:

Hooroo

_________________
Rod Image
http://smg.photobucket.com/albums/v607/Rodney/
Top
 Profile  
 
birty
 Post subject:
PostPosted: Thu Feb 15, 2007 7:47 am 
Offline
848cc
848cc

Joined: Mon Nov 06, 2006 10:45 am
Posts: 193
Location: Canberra
He he - I have no roof lining either :shock: :D

Can you still get new dashboards? Now there is a thought - or just put some elbow grease in and clean up the original (more practical)

Actually the bottom rail section of the dash looks a bit well used.

Cheers everyone!

_________________
Cheers,
Rob.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 101 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.