ausmini • View topic - 12" thats got your attention

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

12" thats got your attention

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

BALLISTIC

Post subject: 12" thats got your attention

Posted: Mon May 05, 2008 2:04 pm

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

Has anyone seen or heard or got any Cosmic 12" rims/wheels to suit a mini?? if so please let me know

Thanks
Scott

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

feralsprint

Post subject:

Posted: Mon May 05, 2008 4:55 pm

1275cc

Joined: Mon Jan 24, 2005 4:02 pm
Posts: 3477
Location: Queanbeyan

i have seen them on a Hillman Imp many many years ago, they were 5.5 x 12s so they did exist

Jon

_________________
Roundies and Clubbies(except vans) are both ugly that is why I have Midas and a van
1293 Mini Midas Bronze,1275 Clubman van

Top

Morris 1100

Post subject:

Posted: Mon May 05, 2008 4:59 pm

Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124

I have seen a lot of Cosmics to suit a Morris 1100 stud pattern. (and if anyone has a spare set I would like them!

)

Top

spraycanmansam

Post subject:

Posted: Mon May 05, 2008 5:04 pm

Forum Graffiti

Joined: Sat Jun 16, 2007 10:31 pm
Posts: 1640

Fancy that, I was going to PM you Morris 1100. Can you tell me what PCD a Morris 1100 is? Also do you know what Tyre they had, I think it's 145/?/R12

Top

Morris 1100

Post subject:

Posted: Mon May 05, 2008 5:24 pm

Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124

spraycanmansam wrote:

Fancy that, I was going to PM you Morris 1100. Can you tell me what PCD a Morris 1100 is? Also do you know what Tyre they had, I think it's 145/?/R12

The Morris 1100 pcd is 4½" as opposed to the Mini 4"
The tyres are 155/80R12. That is the closest tyre size to the original 5.50x12 crossplies. I run Hankook tyres on mine. :wink:

Top

13secmini

Post subject:

Posted: Mon May 05, 2008 5:49 pm

1275cc

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong

does anyone know if the morris 1100 drive flanges work in mini hubs at all?

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs

Top

spraycanmansam

Post subject:

Posted: Mon May 05, 2008 5:51 pm

Forum Graffiti

Joined: Sat Jun 16, 2007 10:31 pm
Posts: 1640

13secmini wrote:

does anyone know if the morris 1100 drive flanges work in mini hubs at all?

<EDIT> Have no idea what I was on about... :roll:

Last edited by spraycanmansam on Fri May 09, 2008 8:02 pm, edited 1 time in total.

Top

Morris 1100

Post subject:

Posted: Mon May 05, 2008 5:53 pm

Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124

13secmini wrote:

does anyone know if the morris 1100 drive flanges work in mini hubs at all?

The Cooper S uses the Morris 1100 CV joint so I would imagine that it would work.
I have only ever fitted the Mini flange to a Morris 1100 hub.

Top

BALLISTIC

Post subject:

Posted: Mon May 05, 2008 5:58 pm

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

So they are around.....but does anyone have any they would like to part company with :?:

anyone??

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

13secmini

Post subject:

Posted: Mon May 05, 2008 6:53 pm

1275cc

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong

Morris 1100 wrote:

13secmini wrote:

does anyone know if the morris 1100 drive flanges work in mini hubs at all?

The Cooper S uses the Morris 1100 CV joint so I would imagine that it would work.
I have only ever fitted the Mini flange to a Morris 1100 hub.

Thanks for that.

So if i was to get a couple of morris 1100 drive flanges i could run them on mini hubs and redrill the flange for say 4x108mm pcd. mmmmm something to look into i think, im trying to run 4x108 wheel on my mini and seeing what options ill have.

The rears maybe a problem unless the entire flange,drum,backing plate would fit a mini swing arm.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs

Top

chopchop

Post subject:

Posted: Tue May 06, 2008 10:08 am

1275cc

Joined: Wed May 11, 2005 10:31 pm
Posts: 3747
Location: Altona, Melbourne

look on ebay UK, i recon i seen them over there last year.
Check mini world ads too, i think its Huddersfield spares?? they sell a variety of new and second hand wheels too.

Top

BALLISTIC

Post subject:

Posted: Tue May 06, 2008 11:48 am

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

thanks chopchop

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

madmorrie

Post subject:

Posted: Tue May 06, 2008 4:37 pm

998cc

Joined: Mon Jan 16, 2006 1:15 pm
Posts: 685
Location: Melbourne

Speaking of re-drilling drive flanges, has anyone had a mini flange redrilled to 4 x 100 PCD?

I had a look and figured if you used larger diameter 12mm studs you could basically drill out the existing holes larger and offset slightly inwards to cater for the difference PCD. ANyone tried it?

If this was doable I'd swap a set of 1100 drive flanges for mini ones...

Madmorrie

Top

Page 1 of 1

[ 13 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: