hi all i picked i up a sc12 or sc14 at a swapmeet the other day but it is missing the pully setup, so i need the whole lot the middle bit that goes onto the shaft and a pully to run around 6psi.
are there any markings on the sc14 and can anyone tell me if the pullys are the same on both?
thanks gary

Hi ya Gary the Sc14 has a Dip stik which is yellow
top right

_________________
Stop Licking the Dog...I Don't Care Who Started It

thanks i have a sc12 then.

SC12 should be clearly embossed on the body on the supercharger.

_________________
1964 Morris 850, 1330 Supercharged - 81.8hp atws.
1975 Leyland Mini S 1100S powered - Nice and reliable.
1977 Leyland Mini LS - Project LS-T

My SC12 has a yellow dipstick so you can't use that to distinguish between SC12 and SC14. It does have SC12 cast on to the body.

I was told the other day that the SC12 has a restrictor in it which if you remove will give about 16psi instead of the standard 7psi.

Yep I was wrong
Here's a handy link for you all 1/2 way down the Page
http://www.autospeed.com/A_110294/cms/article.html

_________________
Stop Licking the Dog...I Don't Care Who Started It

mine has a alloy dipstick the same as the charger.

but there is nothing on it at all that says what it is.

Note the differances between the brackets

SC12



sc14

_________________
Stop Licking the Dog...I Don't Care Who Started It

that helps, thanks i have a sc14.