Ausmini
It is currently Fri Jul 18, 2025 8:12 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
norton
 Post subject: Nylon Unis
PostPosted: Fri Nov 21, 2008 10:21 am 
Offline
998cc
998cc
User avatar

Joined: Sat Aug 27, 2005 3:19 pm
Posts: 630
Location: Blue Mountains
I have found a couple of the plastic type drive couplings that need new uni joints in them. I did a search and found a couple of people said the uni was a Triumph TR6 one, has anyone successfully put new unis in these ? and are they all definately TR6 ones ? dont suppose anyone has the part no. for em ?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 12:55 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
I've never replaced them but yes they are definitely a TR6 uni inside.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
michaelb
 Post subject:
PostPosted: Fri Nov 21, 2008 1:32 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
Plastic unis are much much better than the rubber donuts. Last for years. :D
Yes I am interested in knowing what type of steel uni is inside as I have a spare set with worn out steel unis.

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 1:34 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
There were also some made with steel cones not nylon, I've not seen them for years. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
norton
 Post subject:
PostPosted: Fri Nov 21, 2008 1:38 pm 
Offline
998cc
998cc
User avatar

Joined: Sat Aug 27, 2005 3:19 pm
Posts: 630
Location: Blue Mountains
thanks doc
I depise the rubber ones if I find a part no. and price I'll stick it on here
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 1:42 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
p/no for the nylon ones complete was QL5000 I think, but are NLA now. :cry:
Best just fit TR6 unis, don't break the nylon cones getting em off...

<edit> Just spoke to Karcraft, they say the TR6 ones are a GUJ102.
Same as used on Austin 1800.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Fri Nov 21, 2008 4:12 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
There are actually a few different nylon unis. The QL5000 was made in the UK by Quinton Hazel and they have white nylon cups but there was also a local version made by Hardy Spicer and sold through Repco, these ones have black nylon cups.
The Repco ones were also sold by Leyland Australia. :shock:

Here are a couple that I have picked up on ebay in recent times, one came in Leyland packaging and the other came in Repco packaging...
Image

Image

Image

Image

Image
Top
 Profile  
 
John Smidt
 Post subject:
PostPosted: Fri Nov 21, 2008 4:44 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
Just a little bit of advise, If you are fitting this type of uni it is most important that the couplings on either side of the uni are in good condition, these can spread a liitle if they have previously been fitted with rubber unis that have worn badly, make sure that each part of the uni fits neatly in the couplings before fitting. :D


Last edited by John Smidt on Fri Nov 21, 2008 5:11 pm, edited 1 time in total.

Top
 Profile  
 
TheMiniMan
 Post subject:
PostPosted: Fri Nov 21, 2008 5:03 pm 
Offline
Bimmer Twinky
User avatar

Joined: Mon Sep 06, 2004 4:36 pm
Posts: 8606
Location: Brisbane
&&&&&&&& Don`t Over-Tighten Them>>>>>>>>>

i think they`re only meant to go to 8lbs

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 6:04 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Maybe somebody could arrange to mould some more of these nylon cups up and fit em to TR6 unis, for the benefit of the ausmini populace... :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Morris 1100
 Post subject:
PostPosted: Fri Nov 21, 2008 6:12 pm 
Offline
Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124
drmini in aust wrote:
Maybe somebody could arrange to mould some more of these nylon cups up and fit em to TR6 unis, for the benefit of the ausmini populace... :wink:
There was someone here that made some. I just can't find his post. :?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 6:14 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Doug Lawson on minimania forum made some a while ago. Not sure how they went...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Fri Nov 21, 2008 7:52 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
drmini in aust wrote:
Maybe somebody could arrange to mould some more of these nylon cups up and fit em to TR6 unis, for the benefit of the ausmini populace... :wink:


look like they'd be relatively easy to machine on a lathe ?

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Nov 21, 2008 8:35 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
They would, except the nylon ones have flats moulded on so they don't turn in the yokes...
I guess you could maybe turn and mill or file them, but moulding is the way to go with big numbers.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Fri Nov 21, 2008 9:48 pm, edited 1 time in total.

Top
 Profile  
 
crisonic
 Post subject:
PostPosted: Fri Nov 21, 2008 9:44 pm 
Offline
848cc
848cc

Joined: Sat Sep 01, 2007 8:07 am
Posts: 152
Location: Killingworth Victoria
The current Hardy Spicer number is K5-L4R. These fit the nylon bushes exactly. I bought a number of them about 3 months ago under this number so they are available . Not sure vwhere you are but HS in Campbelfield Vic got mine for me Their phone No is 03 9357 1675

_________________
Mk1 Cooper S
Mini K Rally car
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 81 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.