ausmini • View topic - SU DZ needle

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

SU DZ needle

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

clubmn

Post subject: SU DZ needle

Posted: Tue Jan 13, 2009 8:50 am

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

I seem to have a few of these needles kickin around, Im assuming the DZ needle is a factory standard needle for 998??....

Maybe someone can help me im trying to select a needle for an 1100 with 295 cooper head, extractors and exhaust.. Trying to find a good starting point. single 1 1/2 su

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

BALLISTIC

Post subject:

Posted: Tue Jan 13, 2009 9:12 am

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

If its got a mild cam, a little bit of head work etc start with an M needle for the single 1.5 su

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

clubmn

Post subject: mm1275

Posted: Tue Jan 13, 2009 9:42 am

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

BALLISTIC wrote:

If its got a mild cam, a little bit of head work etc start with an M needle for the single 1.5 su

I thought i rembered puttin in M needles in my twin 1 1/4's... isnt that right...
Might have some hear??

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

74snail

Post subject: In another thread

Posted: Tue Jan 13, 2009 12:32 pm

1275cc

Joined: Wed Oct 01, 2008 11:02 pm
Posts: 2611
Location: werribee vic

In another thread we were discussing this, for a fixed needle HA, for a floating needle ADC both have the same profile and are slightly richer than the factory standard AN still 7,000 rpm again as recommended by Russell from MinisRus .

_________________

Top

BALLISTIC

Post subject: Re: In another thread

Posted: Tue Jan 13, 2009 1:45 pm

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

74snail wrote:

The DZ fixed needle was std in stock 998 with 1.5" carbs from memory in leyland minis.

Scott from Minitopia reccommends as a good starting point "M" needle/s for a mildly tuned engine but the only way you are going to find the best "set up" for any carb/engine is to get it on a rolling road/Dyno.

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

Morris 1100

Post subject:

Posted: Tue Jan 13, 2009 4:05 pm

Causing or creating vexation

Joined: Wed Jul 21, 2004 10:32 pm
Posts: 19124

The DZ was the stock needle for the 1275 Morris 1100S.

Top

clubmn

Post subject: jay

Posted: Tue Jan 13, 2009 4:53 pm

1098cc

Joined: Tue Mar 23, 2004 10:07 pm
Posts: 1504
Location: melbourne australia

Morris 1100 wrote:

The DZ was the stock needle for the 1275 Morris 1100S.

i thought it would had been for a 998, or 1100s as i have about 4 1 1/2 carbs with them in it ... ok well seems like an allright place to start...

_________________

*Reasonable pricing
*I come to you..
Jay: 0431404607

Top

Page 1 of 1

[ 7 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 77 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: