yeah i know im gonna need the hilos am going to get the kit from huddersfod or mini sport havent decided where to send dad off to yet. so even if i lower it half an inch should i still use the lowered shocks?

_________________

You will get away with std shocks unless you lower it heaps.

BTW re Hi-Los.. MiniSport ones (Adjusta-rides) take a non- standard (bigger diameter pin) knuckle joint. Not real easy to get here like stock ones are.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

ahh thanks for pointing that out doc so is it best to go for a huddersford kit. Im not sure how low i want her to be thats wats confusing me wat to get i know the use of each just wat leanancy u have with each shock adsorber with height

_________________

but does that mean with that bigger pin they are stronger?

_________________

if these are real cheap in the UK I might get a few sets and ship them back with my bro's stuff, if / when he moves back to OZ

Huddersford have Gaz shocks with HiLo's for 199 pounds which im thinking is the package i might get

_________________

coooooorrrrr....that's not cheap!

Yeah but haveyou seen this blokes house!?

not too bad around $500

_________________

whose house mine?

_________________

No it means they are bloody hard to get- & forces you to buy MiniSport knuckles..
Gafmo had this problem- but I converted them to use stock Mini knuckles..

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

ahh right. wont be getting mini sport HiLo's then

_________________

AS the Doc Said he saved my ass again
How many fingers can you fit under each guard
Two works out nicely or possible 1 1/2

_________________
Stop Licking the Dog...I Don't Care Who Started It

So we dont want Minisport Hilos, is Huddersford the only other choice?

Where do we get them from (pref WA)? I need Hilos and will be getting the adjustable Konis front and rear for the van. I posted a long time ago, the Konis are available through Wilkinsons Suspension in Perth, will have to find that thread again to see what they are worth

But HiLos -= full kit with rear extension bar... where can we get them? Karcraft sell them for $50 each and the rear bar kits are $57.34, freight to WA $13, but they didnt say which HiLos they are.. should I ask or presume they will be ok? Is there a WA reseller of the good Hilos?

_________________
78 van 1300 cam extractors weber, 12" Superlights Metros Konis HiLos MP3 Amp Sub Alpine speakers and lots of fur
www.crazybitchracing.com

Pretty sure Karcraft's are the MiniSpares ones, NOT MiniSport.
Email and ask-
[email protected]

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.