Ausmini
It is currently Sat Jun 21, 2025 12:32 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
poeee
PostPosted: Mon Aug 10, 2009 11:39 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
I'm wanting to put an HS4 on my van. I don't really want to be changing exhaust (standard pea shooter) at this stage.

Will a 1.25" stock inlet/exhaust manifold have the same size exhaust flange as a 1.5" stock inlet/exhaust manifold?

_________________
Image
Top
 Profile  
 
Mick
 Post subject:
PostPosted: Mon Aug 10, 2009 11:42 am 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18886
Location: Under the bonnet son!
The later Leylands had a pea shooter and a 1.5 inch carb......I think the only time the exhaust size changed was on the 1275LS right?

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Mon Aug 10, 2009 11:47 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Mick wrote:
The later Leylands had a pea shooter and a 1.5 inch carb......I think the only time the exhaust size changed was on the 1275LS right?


If I knew I wouldn't be asking! :lol:

_________________
Image
Top
 Profile  
 
simon k
 Post subject:
PostPosted: Mon Aug 10, 2009 11:50 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
put it on, and you'll find out.... there's a good chance the exhaust is the same size, but the exhaust manifold finishes in a different position

_________________
did I tell you that I won a trophy?
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Mon Aug 10, 2009 11:54 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Maybe a good excuse to put the 3 in to 1's i've got sitting at home. Cut 1.5" manifold... Morris 1100 S/Mini Matic air cleaner box. 8)

Just cost me exhaust and carbie rebuild kit.

No no... don't let me think like that!

_________________
Image
Top
 Profile  
 
Drexxle
 Post subject:
PostPosted: Mon Aug 10, 2009 11:58 am 
Offline
1098cc
1098cc
User avatar

Joined: Sun Mar 29, 2009 10:46 pm
Posts: 1305
Location: Outback Mini Man
youll be able to find an exhaust manifold for a 1.5 easy, and they are pretty much the same, from memory as the 1.25 in respect to the exhaust outlet location.

exhaust sits pretty much centred in the rear of the motor. i have 1.5 plus peashooter on my car.

_________________
Aussie Leyland, Aussie Factory, Aussie Mini S.
Top
 Profile  
 
Mick
 Post subject:
PostPosted: Mon Aug 10, 2009 12:01 pm 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18886
Location: Under the bonnet son!
Vans sound awesome enough on a standard exhaust!

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.
Top
 Profile  
 
Super-mini
 Post subject:
PostPosted: Mon Aug 10, 2009 1:15 pm 
Offline
Supercharged
User avatar

Joined: Mon Oct 13, 2008 3:09 pm
Posts: 1246
Location: Adelaide
i did this the other day and its a straight bolt up.

remember the throttle and choke for the carb are on the other side, and you'll need some extra fuel pipe to reach the float bowl which is also on the opposite side.
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Mon Aug 10, 2009 1:46 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
Super-mini wrote:
i did this the other day and its a straight bolt up.

remember the throttle and choke for the carb are on the other side, and you'll need some extra fuel pipe to reach the float bowl which is also on the opposite side.


Ta! Too easy.

_________________
Image
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.