ausmini • View topic - What are you planning for the Mini this weekend?

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

What are you planning for the Mini this weekend?

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 2

[ 25 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

Wombat

Post subject: What are you planning for the Mini this weekend?

Posted: Fri Sep 04, 2009 8:06 am

1360cc

Joined: Mon Jul 26, 2004 7:23 am
Posts: 7339
Location: Sunny Shine Coast, Qld Australia

I'm on call this weekend so can't leave the house - so the laptop will be down in the garage with the $1.50 silicone keyboard protector and I'm getting stuck into the Mini.
The plan:-

1..Thin skin of bog on the hammer dents on both doors
2..Pull the passenger side hub off and change the bearing over to roller
3..lap and reshim the swivle joints
4..pull out the lower arm and tie rod and fit new adjustable parts
5..tackle the removal of the passenger A panel
6..cut a new fuel sender gasket and fit fuel sender to tank
7..install tank
8..bling a lockable fuel cap to sell
9..fit relays to the headlights
10..unpick/measure old seat covers to make patterns for new

If I get half that done I'll be happy :mrgreen:

_________________
David L

My greatest fear in life is that when I die my wife will sell my Mini and tools for the price I told her I paid for them!

Last edited by Wombat on Fri Sep 04, 2009 8:55 am, edited 1 time in total.

Top

drmini in aust

Post subject:

Posted: Fri Sep 04, 2009 8:50 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39763
Location: near Baulkham Hills, NSW

Dyno Day tomorrow......

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

mattsmadmini

Post subject:

Posted: Fri Sep 04, 2009 8:54 am

Milatsmadmini

Joined: Mon Nov 12, 2007 6:57 pm
Posts: 6287
Location: the inner west of sydeney!

when i finish uni today, hopefully get a new exhaust fabbed up, and my sheared bolts off my drive shaft...

then start sanding back and hi priming, and finish installing my hi-lo's :lol:

_________________
Here am I sitting in my tin can far above the Moon
Planet Earth is blue and there's nothing I can do...

“A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.” - Jeremy Clarkson

Top

jess

Post subject:

Posted: Fri Sep 04, 2009 9:12 am

ginger ninja

Joined: Thu May 15, 2008 3:50 pm
Posts: 5806
Location: Hiding from mini maxx's moggie army somewhere in Brisbane northside

Washing
Polishing
Putting on new trim
Attaching CHERRY badge

Top

beastymini

Post subject:

Posted: Fri Sep 04, 2009 9:19 am

848cc

Joined: Thu Dec 11, 2008 12:59 pm
Posts: 10
Location: Adelaide

Finish installing the dash and making up a new hood lining with some vinyl i picked up

_________________
"If at first you dont succeed, destroy all evidence you tried!"
1978 clubman 998
1973 clubman 1100 supercharged
1959 850 - a very prized possession

Top

BALLISTIC

Post subject:

Posted: Fri Sep 04, 2009 9:32 am

1275cc

Joined: Sun Jul 01, 2007 11:25 pm
Posts: 5174
Location: Greensborough, Victoria

Saturday

BALLISTIC......
Fit new steering rack
Fit new headlight and high beam relays
Fit new top engine steady bushes
Fit 2 tyres
Adjust rear high lows
Service, tune, grease and general inspection
Upload new music to ipod

Moke......
Remove engine/gearbox,
Split engine from gearbox
Change diff ratio to 3.44 from 4.1
Fit centre oil pick-up
Refit gearbox to engine
Refit engine/gearbox into Moke

Van.......
Tune engine
Change needles in twin carbs and tune

Sunday.....

Fathers day......
Expect the unexpected

_________________
http://www.youtube.com/watch?v=nDMkVq1jRGU

Top

sgc

Post subject:

Posted: Fri Sep 04, 2009 9:43 am

This space for rent

Joined: Thu Feb 08, 2007 12:40 pm
Posts: 5455
Location: Melbourne

Just a grease'n'oil change and general service before The Job, I got the mechanical stuff out of the way during the week

_________________
Simon

The adventures of an owner builder in the Tallarook Ranges

Top

IwannaMini

Post subject:

Posted: Fri Sep 04, 2009 10:09 am

1275cc

Joined: Sun Apr 04, 2004 9:31 pm
Posts: 4724
Location: Meadowbank - Sydney

JESUS...

I plan on enjoying the bejesus out of my Mini.... trip to dyno. Give her some time to play with other Mini boys and girls, then off to the Hunter Valley for some premium petrol tasting from a number of different petrol stations, then home again for a wash and polish...

:lol:

Top

kuzzy

Post subject:

Posted: Fri Sep 04, 2009 10:30 am

848cc

Joined: Mon Jul 21, 2008 3:34 pm
Posts: 346
Location: Brisbane

Hill Climb car being built:

1. Mini Automotive for an extensive parts list
2. Fit steering column
3. Trial fit flares

If I get to No 2 on the list I'll be happy! :lol:

Nb Racer:

4. Swap tyres around
5. Give it a good clean ready for next weekends show

_________________
1964 Nb Race Car - big bore short stroke & lots of revs - Sold
1969 Mk2 Cooper S - First Car

Top

qa50

Post subject:

Posted: Fri Sep 04, 2009 10:32 am

848cc

Joined: Tue Aug 08, 2006 9:43 pm
Posts: 141
Location: Gippsland Victoria

I'm going to take the 850 to a local car show on sunday if the weather is nice.

Top

mini-dunger

Post subject:

Posted: Fri Sep 04, 2009 10:34 am

1275cc

Joined: Thu Jun 08, 2006 9:34 pm
Posts: 2372
Location: Adelaide

Setting up the fully adjustable front suspension.... in the shed

_________________

blokeinamoke wrote:

Yep Mokes are ugly - but Moke owners know that. Its like ugly women - she may be a dog but you know your going to get some :wink:

Top

Drexxle

Post subject:

Posted: Fri Sep 04, 2009 11:11 am

1098cc

Joined: Sun Mar 29, 2009 10:46 pm
Posts: 1305
Location: Outback Mini Man

Driving to Marree, the gateway to the real outback.

And then the hard slog of the Oodnadatta WOOT!

_________________
Aussie Leyland, Aussie Factory, Aussie Mini S.

Top

Mini Mad

Post subject:

Posted: Fri Sep 04, 2009 11:37 am

ET 13.457 seconds , OH YEAH !!!!

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney

mattsmadmini wrote:

when i finish uni today, hopefully get a new exhaust fabbed up, and my sheared bolts off my drive shaft...

then start sanding back and hi priming, and finish installing my hi-lo's :lol:

get the exhaust fixed, fixed the driveshafts and off to the dyno day!!

_________________

Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484

Top

simon k

Post subject:

Posted: Fri Sep 04, 2009 11:46 am

Yay For Hay!

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border

I might change my alternator, and might go and pump up a guys suspension.... if I get around to it...

_________________
did I tell you that I won a trophy?

Top

Maxi23

Post subject:

Posted: Fri Sep 04, 2009 12:15 pm

1275cc

Joined: Mon Jun 07, 2004 5:09 pm
Posts: 2260
Location: Central Coast, NSW.

After now having it completely fixed...omfg how awesomly awesome it is to drive now!....I was hoping to go for a spin on the old pac or something.

But no...I am moving house and will be driving a bloody ute all weekend.

Top

Page 1 of 2

[ 25 posts ]

Go to page 1, 2 Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: Fritzie and 93 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: